BMW iX M60 619 hp — Stage 1 file (+31 hp)
hp
Stage 1 file for BMW iX M60 619 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW iX M60 619 hp ECU
BMW iX (2021 - i20) M60 619 hp — premium petrol engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 619 to 650 hp (+31 hp, +5%) and torque from 1015 to 1100 Nm (+85 Nm). A 2021 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
BMW's slogan is “Sheer Driving Pleasure”. Modern top BMW engines are encrypted more heavily than the standard ones and usually require Bench.
Top BMW engines confidently reach Stage 2 with a downpipe + intake + intercooler. Protection on top BMW models is the toughest in the group and requires Bench. Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. Bench reading is the standard procedure for top engines in modern models. Top BMW engines sit at the power ceiling, and the gain is significant. A well-known base once hardware is added (downpipe + intake + intercooler).
Frequently asked questions
What is the Stage 1 effect on the BMW iX M60 619 hp?
Stage 1 for the BMW iX M60 619 hp adds +31 hp — power increases from 619 to 650 hp (+5%). Torque rises from 1015 to 1100 Nm (+85 Nm).
What does a Stage 1 remap of the BMW iX M60 619 hp include?
Stage 1 on the BMW iX M60 619 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +31 hp with no hardware changes.
What does Stage 1 give on the top-spec BMW iX M60 619 hp?
On the top-spec BMW iX M60 619 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How does Stage 2 differ from Stage 1 on the BMW iX M60 619 hp?
Stage 2 for the BMW iX M60 619 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the BMW iX?
Stage 1 on the BMW iX voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the BMW iX M60 619 hp done?
The full remap cycle for the BMW iX — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the BMW iX?
The original BMW iX ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the BMW iX M60 619 hp?
The cost of Stage 1 for the BMW iX M60 619 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.