BMW 6-serie 50i 367 hp — Stage 1 file (+18 hp)
hp
Stage 1 file for BMW 6-serie 50i 367 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW 6-serie 50i 367 hp ECU
BMW 6-serie (2004 - E63) 50i 367 hp — premium petrol engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 367 to 385 hp (+18 hp, +5%) and torque from 490 to 520 Nm (+30 Nm). ECU — Bosch ME9.2. Flashing method: OBD or Bench depending on the unit's protection. The ZF 6HP EGS TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. A petrol engine built in 2004 — the era before widespread firmware encryption, OBD flash without complications.
The BMW community is one of the most active in Europe for chip tuning. A well-known base once hardware is added (downpipe + intake + intercooler).
Top BMW engines confidently reach Stage 2 with a downpipe + intake + intercooler. The BMW community is renowned for active tuning and a large pool of available Stage files. Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. Top BMW engines sit at the power ceiling, and the gain is significant. A well-known base once hardware is added (downpipe + intake + intercooler). Bench reading is the standard procedure for top engines in modern models.
BMW's main gearbox is a modern multi-speed automatic. The TCU rarely needs recalibration up to Stage 1+, as the torque limiter usually copes with the Nm gain. Top BMW models use a reinforced gearbox version that handles significant stock torque.
Frequently asked questions
How much horsepower does Stage 1 add for the BMW 6-serie 50i 367 hp?
Stage 1 chip tuning on the BMW 6-serie 50i 367 hp boosts engine output by 18 hp: from 367 to 385 hp. Torque rises from 490 to 520 Nm (+30 Nm).
What changes in the BMW 6-serie ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the BMW 6-serie with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +18 hp with no hardware changes.
Does Stage 1 make sense on the BMW 6-serie 50i 367 hp with this much power?
On the top-spec BMW 6-serie 50i 367 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the BMW 6-serie 50i 367 hp?
Stage 2 for the BMW 6-serie 50i 367 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the BMW 6-serie 50i 367 hp use?
The BMW 6-serie 50i 367 hp is fitted with the Bosch ME9.2 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
What does remapping the ZF 6HP EGS gearbox give on the BMW 6-serie 50i 367 hp?
The ZF 6HP EGS TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the BMW 6-serie remain valid after Stage 1?
After remapping the BMW 6-serie, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the BMW 6-serie?
Reading and writing via OBD takes 25-30 minutes on the BMW 6-serie. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the BMW 6-serie?
Before Stage 1 the original of the BMW 6-serie 50i 367 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the BMW 6-serie 50i 367 hp cost?
The remap price for the BMW 6-serie 50i 367 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.