BMW 6 Gran Coupé-serie 50i 450 hp — Stage 1 file (+60 hp)
hp
Stage 1 file for BMW 6 Gran Coupé-serie 50i 450 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW 6 Gran Coupé-serie 50i 450 hp ECU
BMW 6 Gran Coupé-serie (2012 - F06) 50i 450 hp — premium petrol engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 450 to 510 hp (+60 hp, +13%) and torque from 650 to 750 Nm (+100 Nm). This engine ships with different ECU variants: Bosch MEVD17.2.8, Bosch MEVD17.2.H, Bosch MG1CS003. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 4 configurations · 4 ECU variants. The 2012 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
xDrive all-wheel drive is BMW's signature system. Top M GmbH engines offer significant potential with a downpipe + intake.
The BMW community is renowned for active tuning and a large pool of available Stage files. Top BMW engines confidently reach Stage 2 with a downpipe + intake + intercooler. On older and mid-generation BMWs, Stage 1 is flashed over OBD without Bench. Top BMW engines sit at the power ceiling, and the gain is significant. A well-known base once hardware is added (downpipe + intake + intercooler). Bench reading is the standard procedure for top engines in modern models.
Top BMW models use a reinforced gearbox version that handles significant stock torque. Older BMW M models use a dual-clutch automated gearbox. BMW's main gearbox is a modern multi-speed automatic.
Frequently asked questions
How many horsepower does the BMW 6 Gran Coupé-serie 50i 450 hp reach after a remap?
After Stage 1 the power of the BMW 6 Gran Coupé-serie 50i 450 hp rises from 450 to 510 hp, a gain of 60 hp (+13%). Torque rises from 650 to 750 Nm (+100 Nm).
How does Stage 1 differ from stock on the BMW 6 Gran Coupé-serie?
Stage 1 is a software optimization of the factory ECU firmware of the BMW 6 Gran Coupé-serie with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +60 hp with no hardware changes.
Does Stage 1 make sense on the BMW 6 Gran Coupé-serie 50i 450 hp with this much power?
Stage 1 for the BMW 6 Gran Coupé-serie 50i 450 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
What is Stage 2 for the BMW 6 Gran Coupé-serie 50i 450 hp?
Stage 2 on the BMW 6 Gran Coupé-serie 50i 450 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the BMW 6 Gran Coupé-serie 50i 450 hp built with?
The BMW 6 Gran Coupé-serie 50i 450 hp comes with 3 ECU variants: Bosch MEVD17.2.8, Bosch MEVD17.2.H, Bosch MG1CS003. Calibration is done for the specific unit after the revision is identified.
What does remapping the ZF 8HPxx gearbox give on the BMW 6 Gran Coupé-serie 50i 450 hp?
The ZF 8HPxx TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the BMW 6 Gran Coupé-serie remain valid after Stage 1?
After remapping the BMW 6 Gran Coupé-serie, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the BMW 6 Gran Coupé-serie?
Reading and writing via OBD takes 25-30 minutes on the BMW 6 Gran Coupé-serie. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the BMW 6 Gran Coupé-serie?
Before Stage 1 the original of the BMW 6 Gran Coupé-serie 50i 450 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the BMW 6 Gran Coupé-serie 50i 450 hp cost?
The remap price for the BMW 6 Gran Coupé-serie 50i 450 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.