BMW 5-serie 30e 299 hp — Stage 1 file (+101 hp)
hp
Stage 1 file for BMW 5-serie 30e 299 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW 5-serie 30e 299 hp ECU
BMW 5-serie (2023 - G60-G61-G62) 30e 299 hp — premium hybrid engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 299 to 400 hp (+101 hp, +34%) and torque from 450 to 600 Nm (+150 Nm).
BMW has always emphasised driver engagement — a signature trait of the brand. On a PHEV, the ICE part is tuned just like the pure combustion variant. Full-EV BMWs keep the inverter and BMS locked, so traditional chip tuning does not apply. PHEV variants are available across most BMW series.
Protection on top BMW models is the toughest in the group and requires Bench. The BMW community is renowned for active tuning and a large pool of available Stage files. Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. High-output engines deliver a solid gain with Stage 1 on stock hardware. The BMW premium segment is a high-output platform with Stage 2 potential. The hardware headroom allows a confident move to Stage 1 without changing the turbo.
Frequently asked questions
How much does the power of the BMW 5-serie 30e 299 hp increase after Stage 1?
After Stage 1 the power of the BMW 5-serie 30e 299 hp rises from 299 to 400 hp, a gain of 101 hp (+34%). Torque rises from 450 to 600 Nm (+150 Nm).
How does Stage 1 differ from stock on the BMW 5-serie?
Stage 1 is a software optimization of the factory ECU firmware of the BMW 5-serie with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +101 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the BMW 5-serie?
The high-output BMW 5-serie 30e 299 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the BMW 5-serie 30e 299 hp?
Stage 2 on the BMW 5-serie 30e 299 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the BMW 5-serie remain valid after Stage 1?
After remapping the BMW 5-serie, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the BMW 5-serie?
Reading and writing via OBD takes 25-30 minutes on the BMW 5-serie. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the BMW 5-serie?
Before Stage 1 the original of the BMW 5-serie 30e 299 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the BMW 5-serie 30e 299 hp cost?
The remap price for the BMW 5-serie 30e 299 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.