BMW 5-serie 40i 306 hp — Stage 1 file (+24 hp)
hp
Stage 1 file for BMW 5-serie 40i 306 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW 5-serie 40i 306 hp ECU
BMW 5-serie (2003 - E60) 40i 306 hp — premium petrol engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 306 to 330 hp (+24 hp, +8%) and torque from 390 to 420 Nm (+30 Nm). ECU — Bosch ME9.2. Flashing method: OBD or Bench depending on the unit's protection. The 2003 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
The BMW Group also includes Mini, Rolls-Royce and BMW Motorrad. On older-generation BMW petrol engines, Stage 1 goes in over OBD without Bench. Third-party flash platforms are an industry of their own for the BMW community. High-output BMW turbo petrol engines deliver a solid gain with Stage 1 on stock hardware.
The BMW community is renowned for active tuning and a large pool of available Stage files. Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. The hardware headroom allows a confident move to Stage 1 without changing the turbo. High-output engines deliver a solid gain with Stage 1 on stock hardware. The BMW premium segment is a high-output platform with Stage 2 potential.
Frequently asked questions
What is the Stage 1 effect on the BMW 5-serie 40i 306 hp?
The Stage 1 gain for the BMW 5-serie 40i 306 hp is 24 hp (+8%) over the stock 306 hp, for a total of 330 hp. Torque rises from 390 to 420 Nm (+30 Nm).
What is Stage 1 chip tuning for the BMW 5-serie?
Stage 1 on the BMW 5-serie 40i 306 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +24 hp with no hardware changes.
What does Stage 1 give on the powerful BMW 5-serie 40i 306 hp?
The high-output BMW 5-serie 40i 306 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the BMW 5-serie 40i 306 hp?
Stage 2 on the BMW 5-serie 40i 306 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the BMW 5-serie 40i 306 hp run?
The control unit of the BMW 5-serie 40i 306 hp is the Bosch ME9.2. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the BMW 5-serie?
Stage 1 on the BMW 5-serie voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the BMW 5-serie 40i 306 hp done?
The full remap cycle for the BMW 5-serie — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the BMW 5-serie?
The original BMW 5-serie ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the BMW 5-serie 40i 306 hp?
The cost of Stage 1 for the BMW 5-serie 40i 306 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.