BMW 3-serie 16ed (1.5) 116 hp — Stage 1 file (+24 hp)
hp
Stage 1 file for BMW 3-serie 16ed (1.5) 116 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW 3-serie 16ed (1.5) 116 hp ECU
BMW 3-serie (2015 - F30-F31-F35-LCI) 16ed (1.5) 116 hp — premium diesel engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 116 to 140 hp (+24 hp, +21%) and torque from 270 to 320 Nm (+50 Nm). ECU — Bosch EDC17C50. Flashing method: OBD or Bench depending on the unit's protection. The 2015 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
M GmbH is BMW's performance division, building M engines since 1972. BMW diesels are known for high torque, and Stage 1 delivers an especially noticeable Nm gain.
The BMW community is renowned for active tuning and a large pool of available Stage files. Stage 1 on mid-range BMW diesels delivers a noticeable torque gain. On older and mid-generation BMWs, Stage 1 is flashed over OBD without Bench. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. Mid-range engines form the backbone of the range, and Stage 1 preserves engine life. The mainstream base is the most refined chip tuning segment in Europe.
Frequently asked questions
What power gain do you get after chip tuning the BMW 3-serie 16ed (1.5) 116 hp?
After Stage 1 the power of the BMW 3-serie 16ed (1.5) 116 hp rises from 116 to 140 hp, a gain of 24 hp (+21%). Torque rises from 270 to 320 Nm (+50 Nm).
How does Stage 1 differ from stock on the BMW 3-serie?
Stage 1 on the BMW 3-serie 16ed (1.5) 116 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +24 hp with no hardware changes.
Is a Stage 1 remap safe for the 16ed (1.5) 116 hp?
Stage 1 on the BMW 3-serie 16ed (1.5) 116 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the BMW 3-serie 16ed (1.5) 116 hp?
Stage 2 on the BMW 3-serie 16ed (1.5) 116 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the BMW 3-serie 16ed (1.5) 116 hp run?
The control unit of the BMW 3-serie 16ed (1.5) 116 hp is the Bosch EDC17C50. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the BMW 3-serie?
Stage 1 on the BMW 3-serie voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the BMW 3-serie 16ed (1.5) 116 hp done?
The full remap cycle for the BMW 3-serie — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the BMW 3-serie?
The original BMW 3-serie ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the BMW 3-serie 16ed (1.5) 116 hp?
The cost of Stage 1 for the BMW 3-serie 16ed (1.5) 116 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.