BMW 3-serie 18d 122 hp — Stage 1 file (+33 hp)
hp
Stage 1 file for BMW 3-serie 18d 122 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW 3-serie 18d 122 hp ECU
BMW 3-serie (2005 - E90) 18d 122 hp — premium diesel engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 122 to 155 hp (+33 hp, +27%) and torque from 280 to 350 Nm (+70 Nm). This engine ships with different ECU variants: Bosch EDC16C1, Bosch EDC16C35. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2005 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
BMW is a premium manufacturer from Munich, founded in 1916 as an aircraft-engine works. BMW's diesel segment competes directly with Mercedes and Audi.
Stage 1 on mid-range BMW diesels delivers a noticeable torque gain. The BMW community is renowned for active tuning and a large pool of available Stage files. Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. Mid-range engines form the backbone of the range, and Stage 1 preserves engine life. The mainstream base is the most refined chip tuning segment in Europe. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes.
Frequently asked questions
How much does the power of the BMW 3-serie 18d 122 hp increase after Stage 1?
The Stage 1 gain for the BMW 3-serie 18d 122 hp is 33 hp (+27%) over the stock 122 hp, for a total of 155 hp. Torque rises from 280 to 350 Nm (+70 Nm).
What is Stage 1 chip tuning for the BMW 3-serie?
Stage 1 is a software optimization of the factory ECU firmware of the BMW 3-serie with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +33 hp with no hardware changes.
What is the risk of Stage 1 on the BMW 3-serie 18d 122 hp?
A remap of the BMW 3-serie 18d 122 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the BMW 3-serie 18d 122 hp?
Stage 2 on the BMW 3-serie 18d 122 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the BMW 3-serie 18d 122 hp built with?
The BMW 3-serie 18d 122 hp comes with 2 ECU variants: Bosch EDC16C1, Bosch EDC16C35. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the BMW 3-serie remain valid after Stage 1?
After remapping the BMW 3-serie, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the BMW 3-serie?
Reading and writing via OBD takes 25-30 minutes on the BMW 3-serie. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the BMW 3-serie?
Before Stage 1 the original of the BMW 3-serie 18d 122 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the BMW 3-serie 18d 122 hp cost?
The remap price for the BMW 3-serie 18d 122 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.