BMW 2-Active Tourer 20d 190 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for BMW 2-Active Tourer 20d 190 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW 2-Active Tourer 20d 190 hp ECU
BMW 2-Active Tourer (2014 - F45) 20d 190 hp — premium diesel engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 190 to 225 hp (+35 hp, +18%) and torque from 400 to 460 Nm (+60 Nm). This engine ships with different ECU variants: Bosch EDC17C41, Bosch EDC17C50, Bosch EDC17C56. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 4 configurations · 4 ECU variants. The 2014 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The BMW Group also includes Mini, Rolls-Royce and BMW Motorrad. The factory calibration on BMW diesels is conservative, with significant headroom for Stage 1.
The BMW community is renowned for active tuning and a large pool of available Stage files. Stage 1 on mid-range BMW diesels delivers a noticeable torque gain. On older and mid-generation BMWs, Stage 1 is flashed over OBD without Bench. The mainstream base is the most refined chip tuning segment in Europe. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. Mid-range engines form the backbone of the range, and Stage 1 preserves engine life.
BMW's main gearbox is a modern multi-speed automatic. Mini and FWD compacts use a different TCU platform with its own tooling base. The TCU rarely needs recalibration up to Stage 1+, as the torque limiter usually copes with the Nm gain.
Frequently asked questions
What is the Stage 1 effect on the BMW 2-Active Tourer 20d 190 hp?
After Stage 1 the power of the BMW 2-Active Tourer 20d 190 hp rises from 190 to 225 hp, a gain of 35 hp (+18%). Torque rises from 400 to 460 Nm (+60 Nm).
How does Stage 1 differ from stock on the BMW 2-Active Tourer?
Stage 1 chip tuning of the BMW 2-Active Tourer is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +35 hp with no hardware changes.
Can you do Stage 1 on the BMW 2-Active Tourer 20d 190 hp?
Yes, Stage 1 for the BMW 2-Active Tourer 20d 190 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the BMW 2-Active Tourer?
Stage 2 on the BMW 2-Active Tourer 20d 190 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the BMW 2-Active Tourer 20d 190 hp?
The BMW 2-Active Tourer 20d 190 hp was fitted with different ECUs depending on the year and trim: Bosch EDC17C41, Bosch EDC17C50, Bosch EDC17C56. The write method (OBD, Bench, Boot) is determined when the unit is read.
Is the ZF 8HPxx TCU calibrated together with Stage 1?
Yes, on the BMW 2-Active Tourer 20d 190 hp the ZF 8HPxx TCU is calibrated with a separate file. The torque limit, shift maps, launch control rpm and clutch torque map are changed. The factory torque limiter in the TCU is usually below what the engine can deliver after Stage 1.
What happens to the BMW 2-Active Tourer warranty after chip tuning?
The factory warranty of the BMW 2-Active Tourer does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the BMW 2-Active Tourer take?
On the BMW 2-Active Tourer 20d 190 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the BMW 2-Active Tourer?
Yes, the original ECU firmware of the BMW 2-Active Tourer 20d 190 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the BMW 2-Active Tourer?
Stage 1 for the BMW 2-Active Tourer 20d 190 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.