BMW 2-Active Tourer 16d (1.5) 116 hp — Stage 1 file (+24 hp)
hp
Stage 1 file for BMW 2-Active Tourer 16d (1.5) 116 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW 2-Active Tourer 16d (1.5) 116 hp ECU
BMW 2-Active Tourer (2014 - F45) 16d (1.5) 116 hp — premium diesel engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 116 to 140 hp (+24 hp, +21%) and torque from 270 to 320 Nm (+50 Nm). This engine ships with different ECU variants: Bosch EDC17C50, Bosch MD1CS001. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2014 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The BMW community is one of the most active in Europe for chip tuning. Mid-range BMW diesels are a mainstream chip tuning subject in Europe.
The BMW community is renowned for active tuning and a large pool of available Stage files. Stage 1 on mid-range BMW diesels delivers a noticeable torque gain. On older and mid-generation BMWs, Stage 1 is flashed over OBD without Bench. Mid-range engines form the backbone of the range, and Stage 1 preserves engine life. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The mainstream base is the most refined chip tuning segment in Europe.
Frequently asked questions
What is the Stage 1 effect on the BMW 2-Active Tourer 16d (1.5) 116 hp?
After Stage 1 the power of the BMW 2-Active Tourer 16d (1.5) 116 hp rises from 116 to 140 hp, a gain of 24 hp (+21%). Torque rises from 270 to 320 Nm (+50 Nm).
How does Stage 1 differ from stock on the BMW 2-Active Tourer?
Stage 1 is a software optimization of the factory ECU firmware of the BMW 2-Active Tourer with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +24 hp with no hardware changes.
What is the risk of Stage 1 on the BMW 2-Active Tourer 16d (1.5) 116 hp?
A remap of the BMW 2-Active Tourer 16d (1.5) 116 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the BMW 2-Active Tourer 16d (1.5) 116 hp?
Stage 2 on the BMW 2-Active Tourer 16d (1.5) 116 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the BMW 2-Active Tourer 16d (1.5) 116 hp built with?
The BMW 2-Active Tourer 16d (1.5) 116 hp comes with 2 ECU variants: Bosch EDC17C50, Bosch MD1CS001. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the BMW 2-Active Tourer remain valid after Stage 1?
After remapping the BMW 2-Active Tourer, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the BMW 2-Active Tourer?
Reading and writing via OBD takes 25-30 minutes on the BMW 2-Active Tourer. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the BMW 2-Active Tourer?
Before Stage 1 the original of the BMW 2-Active Tourer 16d (1.5) 116 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the BMW 2-Active Tourer 16d (1.5) 116 hp cost?
The remap price for the BMW 2-Active Tourer 16d (1.5) 116 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.