BMW 1-serie 16ed (1.5) 116 hp — Stage 1 file (+24 hp)
hp
Stage 1 file for BMW 1-serie 16ed (1.5) 116 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW 1-serie 16ed (1.5) 116 hp ECU
BMW 1-serie (2015 - F20-LCI) 16ed (1.5) 116 hp — premium diesel engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 116 to 140 hp (+24 hp, +21%) and torque from 270 to 320 Nm (+50 Nm). ECU — Bosch EDC17C50. Flashing method: OBD or Bench depending on the unit's protection. A diesel built in 2015 — the Tricore ECU era; OBD flash works on most production revisions.
BMW's slogan is “Sheer Driving Pleasure”. Mid-generation diesel models use standard OBD read/write.
Stage 1 on mid-range BMW diesels delivers a noticeable torque gain. On older and mid-generation BMWs, Stage 1 is flashed over OBD without Bench. Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. Mid-range engines form the backbone of the range, and Stage 1 preserves engine life. The mainstream base is the most refined chip tuning segment in Europe. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes.
Frequently asked questions
How much does the power of the BMW 1-serie 16ed (1.5) 116 hp increase after Stage 1?
Stage 1 for the BMW 1-serie 16ed (1.5) 116 hp adds +24 hp — power increases from 116 to 140 hp (+21%). Torque rises from 270 to 320 Nm (+50 Nm).
What does a Stage 1 remap of the BMW 1-serie 16ed (1.5) 116 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the BMW 1-serie with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +24 hp with no hardware changes.
What is the risk of Stage 1 on the BMW 1-serie 16ed (1.5) 116 hp?
A remap of the BMW 1-serie 16ed (1.5) 116 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the BMW 1-serie 16ed (1.5) 116 hp?
Stage 2 for the BMW 1-serie 16ed (1.5) 116 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the BMW 1-serie 16ed (1.5) 116 hp use?
The BMW 1-serie 16ed (1.5) 116 hp is fitted with the Bosch EDC17C50 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the BMW 1-serie remain valid after Stage 1?
After remapping the BMW 1-serie, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the BMW 1-serie?
Reading and writing via OBD takes 25-30 minutes on the BMW 1-serie. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the BMW 1-serie?
Before Stage 1 the original of the BMW 1-serie 16ed (1.5) 116 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the BMW 1-serie 16ed (1.5) 116 hp cost?
The remap price for the BMW 1-serie 16ed (1.5) 116 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.