BMW 1-serie 18d 136 hp — Stage 1 file (+44 hp)
hp
Stage 1 file for BMW 1-serie 18d 136 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW 1-serie 18d 136 hp ECU
BMW 1-serie (2011 - F20) 18d 136 hp — premium diesel engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 136 to 180 hp (+44 hp, +32%) and torque from 300 to 400 Nm (+100 Nm). This engine ships with different ECU variants: Bosch EDC17C06, Bosch EDC17C41, Bosch EDC17C50, Bosch EDC17C56. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 8 configurations · 4 ECU variants. A diesel built in 2011 — the Tricore ECU era; OBD flash works on most production revisions.
The BMW community is one of the most active in Europe for chip tuning. Mid-range BMW diesels are a mainstream chip tuning subject in Europe.
Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. The BMW community is renowned for active tuning and a large pool of available Stage files. Stage 1 on mid-range BMW diesels delivers a noticeable torque gain. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. Mid-range engines form the backbone of the range, and Stage 1 preserves engine life. The mainstream base is the most refined chip tuning segment in Europe.
Frequently asked questions
What power gain do you get after chip tuning the BMW 1-serie 18d 136 hp?
Stage 1 chip tuning on the BMW 1-serie 18d 136 hp boosts engine output by 44 hp: from 136 to 180 hp. Torque rises from 300 to 400 Nm (+100 Nm).
What changes in the BMW 1-serie ECU after Stage 1?
Stage 1 on the BMW 1-serie 18d 136 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +44 hp with no hardware changes.
Is a Stage 1 remap safe for the 18d 136 hp?
Stage 1 on the BMW 1-serie 18d 136 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the BMW 1-serie 18d 136 hp?
Stage 2 for the BMW 1-serie 18d 136 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the BMW 1-serie 18d 136 hp have?
The BMW 1-serie 18d 136 hp has 4 ECU variants: Bosch EDC17C06, Bosch EDC17C41, Bosch EDC17C50, Bosch EDC17C56. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the BMW 1-serie?
Stage 1 on the BMW 1-serie voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the BMW 1-serie 18d 136 hp done?
The full remap cycle for the BMW 1-serie — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the BMW 1-serie?
The original BMW 1-serie ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the BMW 1-serie 18d 136 hp?
The cost of Stage 1 for the BMW 1-serie 18d 136 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.