BMW 1-serie 14d 95 hp — Stage 1 file (+55 hp)
hp
Stage 1 file for BMW 1-serie 14d 95 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW 1-serie 14d 95 hp ECU
BMW 1-serie (2011 - F20) 14d 95 hp — premium diesel engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 95 to 150 hp (+55 hp, +58%) and torque from 235 to 345 Nm (+110 Nm). ECU — Bosch EDC17C41. Flashing method: OBD or Bench depending on the unit's protection. A diesel built in 2011 — the Tricore ECU era; OBD flash works on most production revisions.
M GmbH is BMW's performance division, building M engines since 1972. BMW diesels are known for high torque, and Stage 1 delivers an especially noticeable Nm gain.
On older and mid-generation BMWs, Stage 1 is flashed over OBD without Bench. The BMW community is renowned for active tuning and a large pool of available Stage files. Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. On low-output engines, Stage 1 is safe and does not over-stress the hardware. On naturally aspirated engines without a turbo, the main effect is on throttle response. In the city segment, Stage 1 is more about comfort than power.
Frequently asked questions
How many horsepower does the BMW 1-serie 14d 95 hp reach after a remap?
Stage 1 for the BMW 1-serie 14d 95 hp adds +55 hp — power increases from 95 to 150 hp (+58%). Torque rises from 235 to 345 Nm (+110 Nm).
What does a Stage 1 remap of the BMW 1-serie 14d 95 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the BMW 1-serie with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +55 hp with no hardware changes.
Is Stage 1 worth doing on the base BMW 1-serie?
Yes, Stage 1 on the low-output BMW 1-serie 14d 95 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the BMW 1-serie 14d 95 hp?
Stage 2 for the BMW 1-serie 14d 95 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the BMW 1-serie 14d 95 hp use?
The BMW 1-serie 14d 95 hp is fitted with the Bosch EDC17C41 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the BMW 1-serie remain valid after Stage 1?
After remapping the BMW 1-serie, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the BMW 1-serie?
Reading and writing via OBD takes 25-30 minutes on the BMW 1-serie. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the BMW 1-serie?
Before Stage 1 the original of the BMW 1-serie 14d 95 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the BMW 1-serie 14d 95 hp cost?
The remap price for the BMW 1-serie 14d 95 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.