BMW 1-serie 20d 163 hp — Stage 1 file (+37 hp)
hp
Stage 1 file for BMW 1-serie 20d 163 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW 1-serie 20d 163 hp ECU
BMW 1-serie (2007 - E81-E87-LCI) 20d 163 hp — premium diesel engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 163 to 200 hp (+37 hp, +23%) and torque from 340 to 420 Nm (+80 Nm). This engine ships with different ECU variants: Bosch EDC16C1, Bosch EDC16C35, Bosch EDC17C41, Bosch EDC17CP02. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 8 configurations · 4 ECU variants. The 2007 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
The BMW Group also includes Mini, Rolls-Royce and BMW Motorrad. The factory calibration on BMW diesels is conservative, with significant headroom for Stage 1.
Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. Stage 1 on mid-range BMW diesels delivers a noticeable torque gain. The BMW community is renowned for active tuning and a large pool of available Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. Mid-range engines form the backbone of the range, and Stage 1 preserves engine life. The mainstream base is the most refined chip tuning segment in Europe.
Frequently asked questions
How many horsepower does the BMW 1-serie 20d 163 hp reach after a remap?
After Stage 1 the power of the BMW 1-serie 20d 163 hp rises from 163 to 200 hp, a gain of 37 hp (+23%). Torque rises from 340 to 420 Nm (+80 Nm).
How does Stage 1 differ from stock on the BMW 1-serie?
Stage 1 on the BMW 1-serie 20d 163 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +37 hp with no hardware changes.
Is a Stage 1 remap safe for the 20d 163 hp?
Stage 1 on the BMW 1-serie 20d 163 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the BMW 1-serie 20d 163 hp?
Stage 2 on the BMW 1-serie 20d 163 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the BMW 1-serie 20d 163 hp have?
The BMW 1-serie 20d 163 hp has 4 ECU variants: Bosch EDC16C1, Bosch EDC16C35, Bosch EDC17C41, Bosch EDC17CP02. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the BMW 1-serie?
Stage 1 on the BMW 1-serie voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the BMW 1-serie 20d 163 hp done?
The full remap cycle for the BMW 1-serie — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the BMW 1-serie?
The original BMW 1-serie ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the BMW 1-serie 20d 163 hp?
The cost of Stage 1 for the BMW 1-serie 20d 163 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.