Bentley Continental GT 4.0 V8 Turbo 550 hp — Stage 1 file (+70 hp)
hp
Stage 1 file for Bentley Continental GT 4.0 V8 Turbo 550 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Bentley Continental GT 4.0 V8 Turbo 550 hp ECU
Bentley Continental GT (2018) 4.0 V8 Turbo 550 hp — luxury petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Великобритания, 1919). Stage 1 chip tuning raises power from 550 to 620 hp (+70 hp, +13%) and torque from 770 to 850 Nm (+80 Nm). ECU — Bosch MG1CS008. Flashing method: OBD or Bench depending on the unit's protection. The ZF AL552 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern petrol engine built in 2018 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Bentley is a British ultra-luxury manufacturer from Crewe, founded in 1919. Bentley has been part of the Volkswagen Group (VAG) since 1998. Bentley positions itself as ultra-luxury, with an emphasis on hand-built craftsmanship and opulence. Top-tier Bentley engines have significant potential with hardware. Bentley's petrol range comprises top-tier turbo engines and naturally aspirated premium units. The factory Bentley calibration is premium-comfort oriented, and headroom for Stage 1 remains.
Protection on modern Bentley models is tight, so Bench is required. Within the VAG group, Bentley shares some ECUs with Audi. The Bentley community is an ultra-premium chip tuning niche. Top-tier Bentley engines sit at the power ceiling of the ultra-luxury segment; the gain is significant. A Bench read is standard procedure on modern Bentleys.
The TCU rarely needs recalibration up to Stage 1+. Top-tier Bentley models come with a reinforced gearbox. Bentley uses the ZF 8HP, a premium eight-speed automatic.
Frequently asked questions
How many horsepower does the Bentley Continental GT 4.0 V8 Turbo 550 hp reach after a remap?
The Stage 1 gain for the Bentley Continental GT 4.0 V8 Turbo 550 hp is 70 hp (+13%) over the stock 550 hp, for a total of 620 hp. Torque rises from 770 to 850 Nm (+80 Nm).
What is Stage 1 chip tuning for the Bentley Continental GT?
Stage 1 is a software optimization of the factory ECU firmware of the Bentley Continental GT with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +70 hp with no hardware changes.
Does Stage 1 make sense on the Bentley Continental GT 4.0 V8 Turbo 550 hp with this much power?
Stage 1 for the Bentley Continental GT 4.0 V8 Turbo 550 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
What is Stage 2 for the Bentley Continental GT 4.0 V8 Turbo 550 hp?
Stage 2 on the Bentley Continental GT 4.0 V8 Turbo 550 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Bentley Continental GT 4.0 V8 Turbo 550 hp use?
The Bentley Continental GT 4.0 V8 Turbo 550 hp is fitted with the Bosch MG1CS008 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
What does remapping the ZF AL552 gearbox give on the Bentley Continental GT 4.0 V8 Turbo 550 hp?
The ZF AL552 TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Bentley Continental GT remain valid after Stage 1?
After remapping the Bentley Continental GT, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Bentley Continental GT?
Reading and writing via OBD takes 25-30 minutes on the Bentley Continental GT. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Bentley Continental GT?
Before Stage 1 the original of the Bentley Continental GT 4.0 V8 Turbo 550 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Bentley Continental GT 4.0 V8 Turbo 550 hp cost?
The remap price for the Bentley Continental GT 4.0 V8 Turbo 550 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.