Bentley Bentayga 6.0 W12 TwinTurbo 608 hp — Stage 1 file (+92 hp)
hp
Stage 1 file for Bentley Bentayga 6.0 W12 TwinTurbo 608 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Bentley Bentayga 6.0 W12 TwinTurbo 608 hp ECU
Bentley Bentayga (2016) 6.0 W12 TwinTurbo 608 hp — luxury petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Великобритания, 1919). Stage 1 chip tuning raises power from 608 to 700 hp (+92 hp, +15%) and torque from 900 to 1000 Nm (+100 Nm). ECU — Bosch MED17.1.62. Flashing method: OBD or Bench depending on the unit's protection. A petrol engine built in 2016 — a Tricore platform without strong protection; OBD access works.
Bentley Mulliner is the brand's bespoke commissioning atelier. The Bentley range covers flagship saloons, coupes, roadsters and SUVs. Bentley shares some platforms with Audi and Porsche within VAG. Bentley shares engines with top-tier Audi within VAG. Bentley's petrol range comprises top-tier turbo engines and naturally aspirated premium units. Top-tier Bentley engines have significant potential with hardware.
With the right hardware, Bentley engines comfortably reach Stage 2. The Bentley community is an ultra-premium chip tuning niche. Within the VAG group, Bentley shares some ECUs with Audi. A Bench read is standard procedure on modern Bentleys. Top-tier Bentley engines sit at the power ceiling of the ultra-luxury segment; the gain is significant.
Frequently asked questions
How much horsepower does Stage 1 add for the Bentley Bentayga 6.0 W12 TwinTurbo 608 hp?
Stage 1 chip tuning on the Bentley Bentayga 6.0 W12 TwinTurbo 608 hp boosts engine output by 92 hp: from 608 to 700 hp. Torque rises from 900 to 1000 Nm (+100 Nm).
What changes in the Bentley Bentayga ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Bentley Bentayga with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +92 hp with no hardware changes.
Does Stage 1 make sense on the Bentley Bentayga 6.0 W12 TwinTurbo 608 hp with this much power?
On the top-spec Bentley Bentayga 6.0 W12 TwinTurbo 608 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Bentley Bentayga 6.0 W12 TwinTurbo 608 hp?
Stage 2 for the Bentley Bentayga 6.0 W12 TwinTurbo 608 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Bentley Bentayga 6.0 W12 TwinTurbo 608 hp use?
The Bentley Bentayga 6.0 W12 TwinTurbo 608 hp is fitted with the Bosch MED17.1.62 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Bentley Bentayga remain valid after Stage 1?
After remapping the Bentley Bentayga, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Bentley Bentayga?
Reading and writing via OBD takes 25-30 minutes on the Bentley Bentayga. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Bentley Bentayga?
Before Stage 1 the original of the Bentley Bentayga 6.0 W12 TwinTurbo 608 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Bentley Bentayga 6.0 W12 TwinTurbo 608 hp cost?
The remap price for the Bentley Bentayga 6.0 W12 TwinTurbo 608 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.