Bentley Bentayga 3.0 V6 Turbo Hybrid 449 hp — Stage 1 file (+51 hp)
hp
Stage 1 file for Bentley Bentayga 3.0 V6 Turbo Hybrid 449 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Bentley Bentayga 3.0 V6 Turbo Hybrid 449 hp ECU
Bentley Bentayga (2016) 3.0 V6 Turbo Hybrid 449 hp — luxury hybrid engine of the passenger segment of the Volkswagen Group (VAG) group (Великобритания, 1919). Stage 1 chip tuning raises power from 449 to 500 hp (+51 hp, +11%) and torque from 700 to 800 Nm (+100 Nm). ECU — Bosch MG1CS002. Flashing method: OBD or Bench depending on the unit's protection. The ZF AL552 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants.
Bentley Mulliner is the brand's bespoke commissioning atelier. The Bentley range covers flagship saloons, coupes, roadsters and SUVs. Bentley shares some platforms with Audi and Porsche within VAG. Bentley PHEV variants combine a top-tier turbo engine with an electric motor. Bentley is developing hybrid and electric versions within VAG.
With the right hardware, Bentley engines comfortably reach Stage 2. The Bentley community is an ultra-premium chip tuning niche. Within the VAG group, Bentley shares some ECUs with Audi. A Bench read is standard procedure on modern Bentleys. Top-tier Bentley engines sit at the power ceiling of the ultra-luxury segment; the gain is significant.
The TCU rarely needs recalibration up to Stage 1+. Top-tier Bentley models come with a reinforced gearbox. Bentley uses the ZF 8HP, a premium eight-speed automatic.
Frequently asked questions
How much does the power of the Bentley Bentayga 3.0 V6 Turbo Hybrid 449 hp increase after Stage 1?
Stage 1 for the Bentley Bentayga 3.0 V6 Turbo Hybrid 449 hp adds +51 hp — power increases from 449 to 500 hp (+11%). Torque rises from 700 to 800 Nm (+100 Nm).
What does a Stage 1 remap of the Bentley Bentayga 3.0 V6 Turbo Hybrid 449 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Bentley Bentayga with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +51 hp with no hardware changes.
Does Stage 1 make sense on the Bentley Bentayga 3.0 V6 Turbo Hybrid 449 hp with this much power?
On the top-spec Bentley Bentayga 3.0 V6 Turbo Hybrid 449 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Bentley Bentayga 3.0 V6 Turbo Hybrid 449 hp?
Stage 2 for the Bentley Bentayga 3.0 V6 Turbo Hybrid 449 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Bentley Bentayga 3.0 V6 Turbo Hybrid 449 hp use?
The Bentley Bentayga 3.0 V6 Turbo Hybrid 449 hp is fitted with the Bosch MG1CS002 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
What does remapping the ZF AL552 gearbox give on the Bentley Bentayga 3.0 V6 Turbo Hybrid 449 hp?
The ZF AL552 TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Bentley Bentayga remain valid after Stage 1?
After remapping the Bentley Bentayga, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Bentley Bentayga?
Reading and writing via OBD takes 25-30 minutes on the Bentley Bentayga. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Bentley Bentayga?
Before Stage 1 the original of the Bentley Bentayga 3.0 V6 Turbo Hybrid 449 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Bentley Bentayga 3.0 V6 Turbo Hybrid 449 hp cost?
The remap price for the Bentley Bentayga 3.0 V6 Turbo Hybrid 449 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.