BAIC Beijing BJ20 1.5T 147 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for BAIC Beijing BJ20 1.5T 147 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BAIC Beijing BJ20 1.5T 147 hp ECU
BAIC Beijing BJ20 (2015) 1.5T 147 hp — mass-market petrol engine of the passenger segment of the BAIC Group group (Китай, 1958). Stage 1 chip tuning raises power from 147 to 167 hp (+20 hp, +14%) and torque from 210 to 250 Nm (+40 Nm). The 2015 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
BAIC specialises in the mass-market segment — saloons, crossovers and SUVs. Chinese carmakers are aggressively developing EV and hybrid technology. BAIC is China's oldest carmaker. BAIC's petrol range consists mainly of mainstream-segment turbo engines. The factory calibration is conservative, leaving headroom for Stage 1. Mid-range turbo petrol engines respond to Stage 1 with a noticeable gain.
The BAIC community in China and the CIS is a growing chip tuning market. Stage 1 on petrol engines delivers a noticeable gain. Mid-range BAIC models are a high-volume chip tuning subject in a growing market.
Frequently asked questions
How much horsepower does Stage 1 add for the BAIC Beijing BJ20 1.5T 147 hp?
After Stage 1 the power of the BAIC Beijing BJ20 1.5T 147 hp rises from 147 to 167 hp, a gain of 20 hp (+14%). Torque rises from 210 to 250 Nm (+40 Nm).
How does Stage 1 differ from stock on the BAIC Beijing BJ20?
Stage 1 on the BAIC Beijing BJ20 1.5T 147 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.5T 147 hp?
Stage 1 on the BAIC Beijing BJ20 1.5T 147 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the BAIC Beijing BJ20 1.5T 147 hp?
Stage 2 on the BAIC Beijing BJ20 1.5T 147 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the BAIC Beijing BJ20?
Stage 1 on the BAIC Beijing BJ20 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the BAIC Beijing BJ20 1.5T 147 hp done?
The full remap cycle for the BAIC Beijing BJ20 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the BAIC Beijing BJ20?
The original BAIC Beijing BJ20 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the BAIC Beijing BJ20 1.5T 147 hp?
The cost of Stage 1 for the BAIC Beijing BJ20 1.5T 147 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.