Audi SQ5 3.0 TFSI V6 354 hp — Stage 1 file (+66 hp)
hp
Stage 1 file for Audi SQ5 3.0 TFSI V6 354 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi SQ5 3.0 TFSI V6 354 hp ECU
Audi SQ5 (2019 - 8FY) 3.0 TFSI V6 354 hp — premium petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 354 to 420 hp (+66 hp, +19%) and torque from 500 to 650 Nm (+150 Nm). ECU — Bosch MG1CS002. Flashing method: OBD or Bench depending on the unit's protection. The ZF AL552 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern petrol engine built in 2019 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
The Audi community is one of the most active in Europe for chip tuning. The e-tron line is Audi's EV range within the VAG group. Audi is part of the Volkswagen Group (VAG), Europe's largest automotive group. Audi Sport's naturally aspirated engines are a distinct calibration segment. Audi Sport is Audi's performance division, building the RS models and supercars. The Audi community is one of the most open in Europe, with a large library of ready-made Stage files.
The Audi community is renowned for its active tuning scene and a huge library of available Stage files. Within the VAG group, ECUs are standardised, so a single file often fits a dozen models across Audi/VW/Skoda/Seat. APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. A Bench read is standard procedure on modern RS engines. RS engines are a proven base once supporting hardware is added (downpipe, intake and intercooler). Top-tier Audi Sport engines (RS models) sit at Audi's power ceiling; the gain is significant. APR and Revo are the leading tuning brands for top Audi engines.
S tronic comes in dry and wet-clutch versions, each with a different torque rating. S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range). The S tronic TCU requires calibration at Stage 1+, as the torque limiter usually sits below the engine's potential.
Frequently asked questions
How many horsepower does the Audi SQ5 3.0 TFSI V6 354 hp reach after a remap?
The Stage 1 gain for the Audi SQ5 3.0 TFSI V6 354 hp is 66 hp (+19%) over the stock 354 hp, for a total of 420 hp. Torque rises from 500 to 650 Nm (+150 Nm).
What is Stage 1 chip tuning for the Audi SQ5?
Stage 1 chip tuning of the Audi SQ5 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +66 hp with no hardware changes.
What is the Stage 1 potential of the Audi SQ5 3.0 TFSI V6 354 hp?
Stage 1 for the Audi SQ5 3.0 TFSI V6 354 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How much does Stage 2 add on the Audi SQ5?
Stage 2 on the Audi SQ5 3.0 TFSI V6 354 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECU is fitted to the Audi SQ5 3.0 TFSI V6 354 hp?
The Audi SQ5 3.0 TFSI V6 354 hp ECU is the Bosch MG1CS002. Production versions support OBD access; locked variants require Bench (BDM/JTAG).
Is the ZF AL552 TCU calibrated together with Stage 1?
Yes, on the Audi SQ5 3.0 TFSI V6 354 hp the ZF AL552 TCU is calibrated with a separate file. The torque limit, shift maps, launch control rpm and clutch torque map are changed. The factory torque limiter in the TCU is usually below what the engine can deliver after Stage 1.
What happens to the Audi SQ5 warranty after chip tuning?
The factory warranty of the Audi SQ5 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Audi SQ5 take?
On the Audi SQ5 3.0 TFSI V6 354 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Audi SQ5?
Yes, the original ECU firmware of the Audi SQ5 3.0 TFSI V6 354 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Audi SQ5?
Stage 1 for the Audi SQ5 3.0 TFSI V6 354 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.