Audi SQ5 3.0 TDI EU6 (+) 340 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Audi SQ5 3.0 TDI EU6 (+) 340 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi SQ5 3.0 TDI EU6 (+) 340 hp ECU
Audi SQ5 (2013 - 8R) 3.0 TDI EU6 (+) 340 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 340 to 390 hp (+50 hp, +15%) and torque from 700 to 780 Nm (+80 Nm). ECU — Bosch EDC17CP44. Flashing method: OBD or Bench depending on the unit's protection. The ZF ALx51 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2013 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Audi is a premium manufacturer from Ingolstadt (Bavaria), founded in 1909 as Audiwerke August Horch & Cie. Audi's petrol range is badged TFSI, and the diesel range TDI. quattro is Audi's signature all-wheel-drive system, introduced in 1980. TDI is Audi's signature designation for direct-injection turbo diesels, in production since 1989. Audi S models with a diesel engine use an electrically driven compressor to eliminate turbo lag. The factory calibration of Audi diesels is conservative, leaving headroom for Stage 1.
On the Audi Q-series diesel SUVs, Stage 1 focuses on torque. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1.
S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range). S tronic comes in dry and wet-clutch versions, each with a different torque rating. The S tronic TCU requires calibration at Stage 1+, as the torque limiter usually sits below the engine's potential.
Frequently asked questions
How much horsepower does Stage 1 add for the Audi SQ5 3.0 TDI EU6 (+) 340 hp?
After Stage 1 the power of the Audi SQ5 3.0 TDI EU6 (+) 340 hp rises from 340 to 390 hp, a gain of 50 hp (+15%). Torque rises from 700 to 780 Nm (+80 Nm).
How does Stage 1 differ from stock on the Audi SQ5?
Stage 1 chip tuning of the Audi SQ5 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +50 hp with no hardware changes.
Is Stage 1 safe on the high-output Audi SQ5 3.0 TDI EU6 (+) 340 hp?
The high-output Audi SQ5 3.0 TDI EU6 (+) 340 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How much does Stage 2 add on the Audi SQ5?
Stage 2 on the Audi SQ5 3.0 TDI EU6 (+) 340 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECU is fitted to the Audi SQ5 3.0 TDI EU6 (+) 340 hp?
The Audi SQ5 3.0 TDI EU6 (+) 340 hp ECU is the Bosch EDC17CP44. Production versions support OBD access; locked variants require Bench (BDM/JTAG).
Is the ZF ALx51 TCU calibrated together with Stage 1?
Yes, on the Audi SQ5 3.0 TDI EU6 (+) 340 hp the ZF ALx51 TCU is calibrated with a separate file. The torque limit, shift maps, launch control rpm and clutch torque map are changed. The factory torque limiter in the TCU is usually below what the engine can deliver after Stage 1.
What happens to the Audi SQ5 warranty after chip tuning?
The factory warranty of the Audi SQ5 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Audi SQ5 take?
On the Audi SQ5 3.0 TDI EU6 (+) 340 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Audi SQ5?
Yes, the original ECU firmware of the Audi SQ5 3.0 TDI EU6 (+) 340 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Audi SQ5?
Stage 1 for the Audi SQ5 3.0 TDI EU6 (+) 340 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.