Audi SQ5 3.0 TDI EU6 328 hp — Stage 1 file (+52 hp)
hp
Stage 1 file for Audi SQ5 3.0 TDI EU6 328 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi SQ5 3.0 TDI EU6 328 hp ECU
Audi SQ5 (2013 - 8R) 3.0 TDI EU6 328 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 328 to 380 hp (+52 hp, +16%) and torque from 650 to 750 Nm (+100 Nm). A diesel built in 2013 — the Tricore ECU era; OBD flash works on most production revisions.
Audi Sport is Audi's performance division, building the RS models. Audi shares platforms with Volkswagen, Porsche, Bentley and Lamborghini within VAG. Audi's signature slogan is “Vorsprung durch Technik” (Progress through Technology). Mid-generation diesel models allow standard OBD read/write within the MQB platform. The MQB platform lets a single calibration cover Audi/VW/Skoda/Seat. DPF/SCR with AdBlue is standard on all Euro-6 Audi diesels.
On Audi, Stage 1 usually fits within the standard turnaround time. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential.
Frequently asked questions
What is the Stage 1 effect on the Audi SQ5 3.0 TDI EU6 328 hp?
Stage 1 chip tuning on the Audi SQ5 3.0 TDI EU6 328 hp boosts engine output by 52 hp: from 328 to 380 hp. Torque rises from 650 to 750 Nm (+100 Nm).
What changes in the Audi SQ5 ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Audi SQ5 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +52 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Audi SQ5?
Stage 1 on the powerful Audi SQ5 3.0 TDI EU6 328 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Audi SQ5 3.0 TDI EU6 328 hp?
Stage 2 for the Audi SQ5 3.0 TDI EU6 328 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Audi SQ5 remain valid after Stage 1?
After remapping the Audi SQ5, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi SQ5?
Reading and writing via OBD takes 25-30 minutes on the Audi SQ5. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi SQ5?
Before Stage 1 the original of the Audi SQ5 3.0 TDI EU6 328 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi SQ5 3.0 TDI EU6 328 hp cost?
The remap price for the Audi SQ5 3.0 TDI EU6 328 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.