Audi SQ2 2.0 TSI R 300 hp — Stage 1 file (+90 hp)
hp
Stage 1 file for Audi SQ2 2.0 TSI R 300 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi SQ2 2.0 TSI R 300 hp ECU
Audi SQ2 (2018) 2.0 TSI R 300 hp — premium petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 300 to 390 hp (+90 hp, +30%) and torque from 400 to 510 Nm (+110 Nm). ECU — Siemens/Continental Simos18.x. Flashing method: OBD or Bench depending on the unit's protection. The Bosch DQ38x TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. A 2018 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Audi's signature slogan is “Vorsprung durch Technik” (Progress through Technology). Audi is a premium manufacturer from Ingolstadt (Bavaria), founded in 1909 as Audiwerke August Horch & Cie. Audi's petrol range is badged TFSI, and the diesel range TDI. TFSI is Audi's signature designation for direct-injection petrol turbo engines.
On Audi, Stage 1 usually fits within the standard turnaround time. The Audi community is renowned for its active tuning scene and a huge library of available Stage files. APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential.
Tiptronic is Audi's classic automatic for longitudinally mounted engines. S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range). S tronic comes in dry and wet-clutch versions, each with a different torque rating.
Frequently asked questions
How many horsepower does the Audi SQ2 2.0 TSI R 300 hp reach after a remap?
Stage 1 chip tuning on the Audi SQ2 2.0 TSI R 300 hp boosts engine output by 90 hp: from 300 to 390 hp. Torque rises from 400 to 510 Nm (+110 Nm).
What changes in the Audi SQ2 ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Audi SQ2 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +90 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Audi SQ2?
Stage 1 on the powerful Audi SQ2 2.0 TSI R 300 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Audi SQ2 2.0 TSI R 300 hp?
Stage 2 for the Audi SQ2 2.0 TSI R 300 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Audi SQ2 2.0 TSI R 300 hp use?
The Audi SQ2 2.0 TSI R 300 hp is fitted with the Siemens/Continental Simos18.x ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
What does remapping the Bosch DQ38x gearbox give on the Audi SQ2 2.0 TSI R 300 hp?
The Bosch DQ38x TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Audi SQ2 remain valid after Stage 1?
After remapping the Audi SQ2, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi SQ2?
Reading and writing via OBD takes 25-30 minutes on the Audi SQ2. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi SQ2?
Before Stage 1 the original of the Audi SQ2 2.0 TSI R 300 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi SQ2 2.0 TSI R 300 hp cost?
The remap price for the Audi SQ2 2.0 TSI R 300 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.