Audi S5 3.0 TFSI 333 hp — Stage 1 file (+87 hp)
hp
Stage 1 file for Audi S5 3.0 TFSI 333 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi S5 3.0 TFSI 333 hp ECU
Audi S5 (2007 - B8) 3.0 TFSI 333 hp — premium petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 333 to 420 hp (+87 hp, +26%) and torque from 440 to 520 Nm (+80 Nm). This engine ships with different ECU variants: Bosch MED17.1.6, Siemens/Continental Simos16.11, Siemens/Continental Simos16.21, Siemens/Continental Simos8.5. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The Temic DL501 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 6 configurations · 5 ECU variants. A petrol engine built in 2007 — the era before widespread firmware encryption, OBD flash without complications.
Audi's signature slogan is “Vorsprung durch Technik” (Progress through Technology). Audi is a premium manufacturer from Ingolstadt (Bavaria), founded in 1909 as Audiwerke August Horch & Cie. Audi's petrol range is badged TFSI, and the diesel range TDI. Audi S models are performance variants with turbo engines, a milder step than RS. Audi shares its ECUs and calibration algorithms with Volkswagen. The factory calibration of Audi petrol engines is conservative, leaving headroom for Stage 1.
On Audi, Stage 1 usually fits within the standard turnaround time. The Audi community is renowned for its active tuning scene and a huge library of available Stage files. APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1.
Tiptronic is Audi's classic automatic for longitudinally mounted engines. S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range). S tronic comes in dry and wet-clutch versions, each with a different torque rating.
Frequently asked questions
How many horsepower does the Audi S5 3.0 TFSI 333 hp reach after a remap?
Stage 1 chip tuning on the Audi S5 3.0 TFSI 333 hp boosts engine output by 87 hp: from 333 to 420 hp. Torque rises from 440 to 520 Nm (+80 Nm).
What changes in the Audi S5 ECU after Stage 1?
Stage 1 chip tuning of the Audi S5 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +87 hp with no hardware changes.
Is Stage 1 safe on the high-output Audi S5 3.0 TFSI 333 hp?
Stage 1 on the powerful Audi S5 3.0 TFSI 333 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How much does Stage 2 add on the Audi S5?
Stage 2 for the Audi S5 3.0 TFSI 333 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the Audi S5 3.0 TFSI 333 hp?
The Audi S5 3.0 TFSI 333 hp was fitted with different ECUs depending on the year and trim: Bosch MED17.1.6, Siemens/Continental Simos16.11, Siemens/Continental Simos16.21, Siemens/Continental Simos8.5. The write method (OBD, Bench, Boot) is determined when the unit is read.
Is the Temic DL501 TCU calibrated together with Stage 1?
Yes, on the Audi S5 3.0 TFSI 333 hp the Temic DL501 TCU is calibrated with a separate file. The torque limit, shift maps, launch control rpm and clutch torque map are changed. The factory torque limiter in the TCU is usually below what the engine can deliver after Stage 1.
What happens to the Audi S5 warranty after chip tuning?
The factory warranty of the Audi S5 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Audi S5 take?
On the Audi S5 3.0 TFSI 333 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Audi S5?
Yes, the original ECU firmware of the Audi S5 3.0 TFSI 333 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Audi S5?
Stage 1 for the Audi S5 3.0 TFSI 333 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.