Audi RS7 4.0 TFSI (Perf.) 605 hp — Stage 1 file (+65 hp)
hp
Stage 1 file for Audi RS7 4.0 TFSI (Perf.) 605 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi RS7 4.0 TFSI (Perf.) 605 hp ECU
Audi RS7 (2013 - C7) 4.0 TFSI (Perf.) 605 hp — premium petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 605 to 670 hp (+65 hp, +11%) and torque from 700 to 850 Nm (+150 Nm). ECU — Bosch MED17.1.1. Flashing method: OBD or Bench depending on the unit's protection. The ZF ALx51 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. A petrol engine built in 2013 — a Tricore platform without strong protection; OBD access works.
Audi's petrol range is badged TFSI, and the diesel range TDI. quattro is Audi's signature all-wheel-drive system, introduced in 1980. The four rings in the Audi logo are a legacy of the 1932 Auto Union merger of Audi, Horch, DKW and Wanderer. Audi RS engines have significant potential with a downpipe and intake. Audi shares its ECUs and calibration algorithms with Volkswagen. The MQB and MLB platforms allow ECU commonality with Volkswagen, Porsche and Bentley.
On Audi, Stage 1 usually fits within the standard turnaround time. On pre-2017 Audi models, Stage 1 is flashed via OBD without bench. With a downpipe, intake and intercooler, Audi RS engines confidently reach Stage 2. APR and Revo are the leading tuning brands for top Audi engines. A Bench read is standard procedure on modern RS engines. RS engines are a proven base once supporting hardware is added (downpipe, intake and intercooler). Top-tier Audi Sport engines (RS models) sit at Audi's power ceiling; the gain is significant.
Older Audi RS models use a dual-clutch automated gearbox. S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range). Tiptronic is Audi's classic automatic for longitudinally mounted engines.
Frequently asked questions
How much does the power of the Audi RS7 4.0 TFSI (Perf.) 605 hp increase after Stage 1?
Stage 1 for the Audi RS7 4.0 TFSI (Perf.) 605 hp adds +65 hp — power increases from 605 to 670 hp (+11%). Torque rises from 700 to 850 Nm (+150 Nm).
What does a Stage 1 remap of the Audi RS7 4.0 TFSI (Perf.) 605 hp include?
Stage 1 chip tuning of the Audi RS7 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +65 hp with no hardware changes.
What is the Stage 1 potential of the Audi RS7 4.0 TFSI (Perf.) 605 hp?
On the top-spec Audi RS7 4.0 TFSI (Perf.) 605 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How much does Stage 2 add on the Audi RS7?
Stage 2 for the Audi RS7 4.0 TFSI (Perf.) 605 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECU is fitted to the Audi RS7 4.0 TFSI (Perf.) 605 hp?
The Audi RS7 4.0 TFSI (Perf.) 605 hp ECU is the Bosch MED17.1.1. Production versions support OBD access; locked variants require Bench (BDM/JTAG).
Is the ZF ALx51 TCU calibrated together with Stage 1?
Yes, on the Audi RS7 4.0 TFSI (Perf.) 605 hp the ZF ALx51 TCU is calibrated with a separate file. The torque limit, shift maps, launch control rpm and clutch torque map are changed. The factory torque limiter in the TCU is usually below what the engine can deliver after Stage 1.
What happens to the Audi RS7 warranty after chip tuning?
The factory warranty of the Audi RS7 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Audi RS7 take?
On the Audi RS7 4.0 TFSI (Perf.) 605 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Audi RS7?
Yes, the original ECU firmware of the Audi RS7 4.0 TFSI (Perf.) 605 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Audi RS7?
Stage 1 for the Audi RS7 4.0 TFSI (Perf.) 605 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.