Audi RS7 4.0 TFSI 560 hp — Stage 1 file (+110 hp)
hp
Stage 1 file for Audi RS7 4.0 TFSI 560 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi RS7 4.0 TFSI 560 hp ECU
Audi RS7 (2013 - C7) 4.0 TFSI 560 hp — premium petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 560 to 670 hp (+110 hp, +20%) and torque from 700 to 840 Nm (+140 Nm). ECU — Bosch MED17.1.1. Flashing method: OBD or Bench depending on the unit's protection. The ZF ALx51 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. A petrol engine built in 2013 — a Tricore platform without strong protection; OBD access works.
Audi's petrol range is badged TFSI, and the diesel range TDI. quattro is Audi's signature all-wheel-drive system, introduced in 1980. The four rings in the Audi logo are a legacy of the 1932 Auto Union merger of Audi, Horch, DKW and Wanderer. Audi RS engines have significant potential with a downpipe and intake. Audi shares its ECUs and calibration algorithms with Volkswagen. The MQB and MLB platforms allow ECU commonality with Volkswagen, Porsche and Bentley.
With a downpipe, intake and intercooler, Audi RS engines confidently reach Stage 2. The Audi community is renowned for its active tuning scene and a huge library of available Stage files. Within the VAG group, ECUs are standardised, so a single file often fits a dozen models across Audi/VW/Skoda/Seat. APR and Revo are the leading tuning brands for top Audi engines. A Bench read is standard procedure on modern RS engines. RS engines are a proven base once supporting hardware is added (downpipe, intake and intercooler). Top-tier Audi Sport engines (RS models) sit at Audi's power ceiling; the gain is significant.
Tiptronic is Audi's classic automatic for longitudinally mounted engines. The S tronic TCU requires calibration at Stage 1+, as the torque limiter usually sits below the engine's potential. S tronic comes in dry and wet-clutch versions, each with a different torque rating.
Frequently asked questions
How much does the power of the Audi RS7 4.0 TFSI 560 hp increase after Stage 1?
Stage 1 for the Audi RS7 4.0 TFSI 560 hp adds +110 hp — power increases from 560 to 670 hp (+20%). Torque rises from 700 to 840 Nm (+140 Nm).
What does a Stage 1 remap of the Audi RS7 4.0 TFSI 560 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Audi RS7 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +110 hp with no hardware changes.
Does Stage 1 make sense on the Audi RS7 4.0 TFSI 560 hp with this much power?
On the top-spec Audi RS7 4.0 TFSI 560 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Audi RS7 4.0 TFSI 560 hp?
Stage 2 for the Audi RS7 4.0 TFSI 560 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Audi RS7 4.0 TFSI 560 hp use?
The Audi RS7 4.0 TFSI 560 hp is fitted with the Bosch MED17.1.1 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
What does remapping the ZF ALx51 gearbox give on the Audi RS7 4.0 TFSI 560 hp?
The ZF ALx51 TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Audi RS7 remain valid after Stage 1?
After remapping the Audi RS7, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi RS7?
Reading and writing via OBD takes 25-30 minutes on the Audi RS7. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi RS7?
Before Stage 1 the original of the Audi RS7 4.0 TFSI 560 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi RS7 4.0 TFSI 560 hp cost?
The remap price for the Audi RS7 4.0 TFSI 560 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.