Audi Q8 55 TFSI (3.0) 340 h — Stage 1 file (+50 hp)
hp
Stage 1 file for Audi Q8 55 TFSI (3.0) 340 h
Target +0 hp. Custom development for your engine.
Chip tuning for Audi Q8 55 TFSI (3.0) 340 h ECU
Audi Q8 (2018) 55 TFSI (3.0) 340 h — premium petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 340 to 390 hp (+50 hp, +15%) and torque from 500 to 600 Nm (+100 Nm). ECU — Bosch MG1CS002. Flashing method: OBD or Bench depending on the unit's protection. The ZF AL552 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. A 2018 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
The e-tron line is Audi's EV range within the VAG group. Audi is part of the Volkswagen Group (VAG), Europe's largest automotive group. Audi Sport is Audi's performance division, building the RS models. The Audi community is one of the most open in Europe, with a large library of ready-made Stage files.
The Audi community is renowned for its active tuning scene and a huge library of available Stage files. APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. Audi S models sit between the standard cars and the RS range. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1.
Tiptronic is Audi's classic automatic for longitudinally mounted engines. S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range). S tronic comes in dry and wet-clutch versions, each with a different torque rating.
Frequently asked questions
How much horsepower does Stage 1 add for the Audi Q8 55 TFSI (3.0) 340 h?
Stage 1 chip tuning on the Audi Q8 55 TFSI (3.0) 340 h boosts engine output by 50 hp: from 340 to 390 hp. Torque rises from 500 to 600 Nm (+100 Nm).
What changes in the Audi Q8 ECU after Stage 1?
Stage 1 chip tuning of the Audi Q8 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +50 hp with no hardware changes.
Is Stage 1 safe on the high-output Audi Q8 55 TFSI (3.0) 340 h?
Stage 1 on the powerful Audi Q8 55 TFSI (3.0) 340 h “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How much does Stage 2 add on the Audi Q8?
Stage 2 for the Audi Q8 55 TFSI (3.0) 340 h is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECU is fitted to the Audi Q8 55 TFSI (3.0) 340 h?
The Audi Q8 55 TFSI (3.0) 340 h ECU is the Bosch MG1CS002. Production versions support OBD access; locked variants require Bench (BDM/JTAG).
Is the ZF AL552 TCU calibrated together with Stage 1?
Yes, on the Audi Q8 55 TFSI (3.0) 340 h the ZF AL552 TCU is calibrated with a separate file. The torque limit, shift maps, launch control rpm and clutch torque map are changed. The factory torque limiter in the TCU is usually below what the engine can deliver after Stage 1.
What happens to the Audi Q8 warranty after chip tuning?
The factory warranty of the Audi Q8 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Audi Q8 take?
On the Audi Q8 55 TFSI (3.0) 340 h: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Audi Q8?
Yes, the original ECU firmware of the Audi Q8 55 TFSI (3.0) 340 h is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Audi Q8?
Stage 1 for the Audi Q8 55 TFSI (3.0) 340 h is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.