Audi Q7 55 TFSI (3.0) 340 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Audi Q7 55 TFSI (3.0) 340 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi Q7 55 TFSI (3.0) 340 hp ECU
Audi Q7 (2019 - 4M-FL) 55 TFSI (3.0) 340 hp — premium petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 340 to 390 hp (+50 hp, +15%) and torque from 500 to 600 Nm (+100 Nm). ECU — Bosch MG1CS002. Flashing method: OBD or Bench depending on the unit's protection. The ZF AL552 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. A 2019 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Audi's signature slogan is “Vorsprung durch Technik” (Progress through Technology). Audi is a premium manufacturer from Ingolstadt (Bavaria), founded in 1909 as Audiwerke August Horch & Cie. Audi's petrol range is badged TFSI, and the diesel range TDI. TFSI is Audi's signature designation for direct-injection petrol turbo engines.
On Audi, Stage 1 usually fits within the standard turnaround time. The Audi community is renowned for its active tuning scene and a huge library of available Stage files. APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1.
S tronic comes in dry and wet-clutch versions, each with a different torque rating. The S tronic TCU requires calibration at Stage 1+, as the torque limiter usually sits below the engine's potential. Tiptronic is Audi's classic automatic for longitudinally mounted engines.
Frequently asked questions
How many horsepower does the Audi Q7 55 TFSI (3.0) 340 hp reach after a remap?
Stage 1 for the Audi Q7 55 TFSI (3.0) 340 hp adds +50 hp — power increases from 340 to 390 hp (+15%). Torque rises from 500 to 600 Nm (+100 Nm).
What does a Stage 1 remap of the Audi Q7 55 TFSI (3.0) 340 hp include?
Stage 1 chip tuning of the Audi Q7 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +50 hp with no hardware changes.
Is Stage 1 safe on the high-output Audi Q7 55 TFSI (3.0) 340 hp?
Stage 1 on the powerful Audi Q7 55 TFSI (3.0) 340 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How much does Stage 2 add on the Audi Q7?
Stage 2 for the Audi Q7 55 TFSI (3.0) 340 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECU is fitted to the Audi Q7 55 TFSI (3.0) 340 hp?
The Audi Q7 55 TFSI (3.0) 340 hp ECU is the Bosch MG1CS002. Production versions support OBD access; locked variants require Bench (BDM/JTAG).
Is the ZF AL552 TCU calibrated together with Stage 1?
Yes, on the Audi Q7 55 TFSI (3.0) 340 hp the ZF AL552 TCU is calibrated with a separate file. The torque limit, shift maps, launch control rpm and clutch torque map are changed. The factory torque limiter in the TCU is usually below what the engine can deliver after Stage 1.
What happens to the Audi Q7 warranty after chip tuning?
The factory warranty of the Audi Q7 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Audi Q7 take?
On the Audi Q7 55 TFSI (3.0) 340 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Audi Q7?
Yes, the original ECU firmware of the Audi Q7 55 TFSI (3.0) 340 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Audi Q7?
Stage 1 for the Audi Q7 55 TFSI (3.0) 340 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.