Audi Q7 45 TDI (3.0) 231 hp — Stage 1 file (+109 hp)
hp
Stage 1 file for Audi Q7 45 TDI (3.0) 231 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi Q7 45 TDI (3.0) 231 hp ECU
Audi Q7 (2019 - 4M-FL) 45 TDI (3.0) 231 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 231 to 340 hp (+109 hp, +47%) and torque from 500 to 720 Nm (+220 Nm). ECU — Bosch MD1CP004. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. A modern diesel built in 2019 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
Audi is part of the Volkswagen Group (VAG), Europe's largest automotive group. Audi Sport is Audi's performance division, building the RS models. Audi shares platforms with Volkswagen, Porsche, Bentley and Lamborghini within VAG. The Audi diesel range is fully unified with Volkswagen, Skoda and Seat within VAG. On modern Audi diesels, the Tricore TPROT protection often requires a Bench read. The MQB platform lets a single calibration cover Audi/VW/Skoda/Seat.
APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. On Audi, Stage 1 usually fits within the standard turnaround time. Audi S models sit between the standard cars and the RS range. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential.
Frequently asked questions
How much does the power of the Audi Q7 45 TDI (3.0) 231 hp increase after Stage 1?
After Stage 1 the power of the Audi Q7 45 TDI (3.0) 231 hp rises from 231 to 340 hp, a gain of 109 hp (+47%). Torque rises from 500 to 720 Nm (+220 Nm).
How does Stage 1 differ from stock on the Audi Q7?
Stage 1 is a software optimization of the factory ECU firmware of the Audi Q7 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +109 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Audi Q7?
The high-output Audi Q7 45 TDI (3.0) 231 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Audi Q7 45 TDI (3.0) 231 hp?
Stage 2 on the Audi Q7 45 TDI (3.0) 231 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Audi Q7 45 TDI (3.0) 231 hp use?
The Audi Q7 45 TDI (3.0) 231 hp is fitted with the Bosch MD1CP004 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Audi Q7 remain valid after Stage 1?
After remapping the Audi Q7, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi Q7?
Reading and writing via OBD takes 25-30 minutes on the Audi Q7. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi Q7?
Before Stage 1 the original of the Audi Q7 45 TDI (3.0) 231 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi Q7 45 TDI (3.0) 231 hp cost?
The remap price for the Audi Q7 45 TDI (3.0) 231 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.