Audi Q5 55 TFSI e (2.0) 367 hp — Stage 1 file (+33 hp)
hp
Stage 1 file for Audi Q5 55 TFSI e (2.0) 367 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi Q5 55 TFSI e (2.0) 367 hp ECU
Audi Q5 (2017 - FY) 55 TFSI e (2.0) 367 hp — premium hybrid engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 367 to 400 hp (+33 hp, +9%) and torque from 500 to 580 Nm (+80 Nm).
Audi is a premium manufacturer from Ingolstadt (Bavaria), founded in 1909 as Audiwerke August Horch & Cie. Audi's petrol range is badged TFSI, and the diesel range TDI. quattro is Audi's signature all-wheel-drive system, introduced in 1980. The Audi e-tron is the all-electric line within VAG. The Audi RS e-tron GT is Audi Sport's top electric series. On pure-EV Audi models, the inverter and BMS are locked; conventional chip tuning does not apply.
APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. On Audi, Stage 1 usually fits within the standard turnaround time. On pre-2017 Audi models, Stage 1 is flashed via OBD without bench. Top-tier Audi Sport engines (RS models) sit at Audi's power ceiling; the gain is significant. APR and Revo are the leading tuning brands for top Audi engines. A Bench read is standard procedure on modern RS engines. RS engines are a proven base once supporting hardware is added (downpipe, intake and intercooler).
Frequently asked questions
How much horsepower does Stage 1 add for the Audi Q5 55 TFSI e (2.0) 367 hp?
After Stage 1 the power of the Audi Q5 55 TFSI e (2.0) 367 hp rises from 367 to 400 hp, a gain of 33 hp (+9%). Torque rises from 500 to 580 Nm (+80 Nm).
How does Stage 1 differ from stock on the Audi Q5?
Stage 1 is a software optimization of the factory ECU firmware of the Audi Q5 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +33 hp with no hardware changes.
Does Stage 1 make sense on the Audi Q5 55 TFSI e (2.0) 367 hp with this much power?
Stage 1 for the Audi Q5 55 TFSI e (2.0) 367 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
What is Stage 2 for the Audi Q5 55 TFSI e (2.0) 367 hp?
Stage 2 on the Audi Q5 55 TFSI e (2.0) 367 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Audi Q5 remain valid after Stage 1?
After remapping the Audi Q5, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi Q5?
Reading and writing via OBD takes 25-30 minutes on the Audi Q5. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi Q5?
Before Stage 1 the original of the Audi Q5 55 TFSI e (2.0) 367 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi Q5 55 TFSI e (2.0) 367 hp cost?
The remap price for the Audi Q5 55 TFSI e (2.0) 367 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.