Audi Q5 50 TDI (3.0) 286 hp — Stage 1 file (+64 hp)
hp
Stage 1 file for Audi Q5 50 TDI (3.0) 286 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi Q5 50 TDI (3.0) 286 hp ECU
Audi Q5 (2017 - FY) 50 TDI (3.0) 286 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 286 to 350 hp (+64 hp, +22%) and torque from 620 to 720 Nm (+100 Nm). ECU — Bosch MD1CP004. Flashing method: OBD or Bench depending on the unit's protection. The ZF AL552 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. A diesel built in 2017 — the Tricore ECU era; OBD flash works on most production revisions.
Audi Sport is Audi's performance division, building the RS models. Audi shares platforms with Volkswagen, Porsche, Bentley and Lamborghini within VAG. Audi's signature slogan is “Vorsprung durch Technik” (Progress through Technology). Mid-generation diesel models allow standard OBD read/write within the MQB platform. The MQB platform lets a single calibration cover Audi/VW/Skoda/Seat. DPF/SCR with AdBlue is standard on all Euro-6 Audi diesels.
On pre-2017 Audi models, Stage 1 is flashed via OBD without bench. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1.
S tronic comes in dry and wet-clutch versions, each with a different torque rating. The S tronic TCU requires calibration at Stage 1+, as the torque limiter usually sits below the engine's potential. Tiptronic is Audi's classic automatic for longitudinally mounted engines.
Frequently asked questions
What is the Stage 1 effect on the Audi Q5 50 TDI (3.0) 286 hp?
Stage 1 for the Audi Q5 50 TDI (3.0) 286 hp adds +64 hp — power increases from 286 to 350 hp (+22%). Torque rises from 620 to 720 Nm (+100 Nm).
What does a Stage 1 remap of the Audi Q5 50 TDI (3.0) 286 hp include?
Stage 1 chip tuning of the Audi Q5 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +64 hp with no hardware changes.
Is Stage 1 safe on the high-output Audi Q5 50 TDI (3.0) 286 hp?
Stage 1 on the powerful Audi Q5 50 TDI (3.0) 286 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How much does Stage 2 add on the Audi Q5?
Stage 2 for the Audi Q5 50 TDI (3.0) 286 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECU is fitted to the Audi Q5 50 TDI (3.0) 286 hp?
The Audi Q5 50 TDI (3.0) 286 hp ECU is the Bosch MD1CP004. Production versions support OBD access; locked variants require Bench (BDM/JTAG).
Is the ZF AL552 TCU calibrated together with Stage 1?
Yes, on the Audi Q5 50 TDI (3.0) 286 hp the ZF AL552 TCU is calibrated with a separate file. The torque limit, shift maps, launch control rpm and clutch torque map are changed. The factory torque limiter in the TCU is usually below what the engine can deliver after Stage 1.
What happens to the Audi Q5 warranty after chip tuning?
The factory warranty of the Audi Q5 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Audi Q5 take?
On the Audi Q5 50 TDI (3.0) 286 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Audi Q5?
Yes, the original ECU firmware of the Audi Q5 50 TDI (3.0) 286 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Audi Q5?
Stage 1 for the Audi Q5 50 TDI (3.0) 286 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.