Audi Q5 40 TFSI (2.0) 190 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Audi Q5 40 TFSI (2.0) 190 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi Q5 40 TFSI (2.0) 190 hp ECU
Audi Q5 (2017 - FY) 40 TFSI (2.0) 190 hp — premium petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 190 to 240 hp (+50 hp, +26%) and torque from 320 to 380 Nm (+60 Nm). This engine ships with different ECU variants: Bosch MG1CS001, Bosch MG1CS111, Siemens/Continental Simos18.10. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DL382, Bosch DQ38x — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 5 configurations · 5 ECU variants. The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Audi is part of the Volkswagen Group (VAG), Europe's largest automotive group. Audi Sport is Audi's performance division, building the RS models. Audi shares platforms with Volkswagen, Porsche, Bentley and Lamborghini within VAG. The MQB and MLB platforms allow ECU commonality with Volkswagen, Porsche and Bentley.
The Audi community is renowned for its active tuning scene and a huge library of available Stage files. Within the VAG group, ECUs are standardised, so a single file often fits a dozen models across Audi/VW/Skoda/Seat. APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe.
S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range). S tronic comes in dry and wet-clutch versions, each with a different torque rating. The S tronic TCU requires calibration at Stage 1+, as the torque limiter usually sits below the engine's potential.
Frequently asked questions
How much does the power of the Audi Q5 40 TFSI (2.0) 190 hp increase after Stage 1?
After Stage 1 the power of the Audi Q5 40 TFSI (2.0) 190 hp rises from 190 to 240 hp, a gain of 50 hp (+26%). Torque rises from 320 to 380 Nm (+60 Nm).
How does Stage 1 differ from stock on the Audi Q5?
Stage 1 chip tuning of the Audi Q5 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +50 hp with no hardware changes.
Can you do Stage 1 on the Audi Q5 40 TFSI (2.0) 190 hp?
Yes, Stage 1 for the Audi Q5 40 TFSI (2.0) 190 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Audi Q5?
Stage 2 on the Audi Q5 40 TFSI (2.0) 190 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Audi Q5 40 TFSI (2.0) 190 hp?
The Audi Q5 40 TFSI (2.0) 190 hp was fitted with different ECUs depending on the year and trim: Bosch MG1CS001, Bosch MG1CS111, Siemens/Continental Simos18.10. The write method (OBD, Bench, Boot) is determined when the unit is read.
How many TCU units does the Audi Q5 40 TFSI (2.0) 190 hp have?
The Audi Q5 40 TFSI (2.0) 190 hp comes with 2 different automatic-transmission TCU units: Temic DL382, Bosch DQ38x. Each is calibrated with a separate file — torque limit, shift maps and launch control rpm for Stage 1.
What happens to the Audi Q5 warranty after chip tuning?
The factory warranty of the Audi Q5 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Audi Q5 take?
On the Audi Q5 40 TFSI (2.0) 190 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Audi Q5?
Yes, the original ECU firmware of the Audi Q5 40 TFSI (2.0) 190 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Audi Q5?
Stage 1 for the Audi Q5 40 TFSI (2.0) 190 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.