Audi Q5 3.0 TDI 245 hp — Stage 1 file (+55 hp)
hp
Stage 1 file for Audi Q5 3.0 TDI 245 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi Q5 3.0 TDI 245 hp ECU
Audi Q5 (2012 - 8R) 3.0 TDI 245 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 245 to 300 hp (+55 hp, +22%) and torque from 500 to 620 Nm (+120 Nm). This engine ships with different ECU variants: Bosch EDC17CP04, Bosch EDC17CP44, Bosch MD1CP004. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: ZF AL552, Temic DL501 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 5 configurations · 5 ECU variants. A diesel built in 2012 — the Tricore ECU era; OBD flash works on most production revisions.
The e-tron line is Audi's EV range within the VAG group. Audi is part of the Volkswagen Group (VAG), Europe's largest automotive group. Audi Sport is Audi's performance division, building the RS models. The European TDI community is the world's largest for passenger-car diesel chip tuning. The Audi diesel range is fully unified with Volkswagen, Skoda and Seat within VAG. Mid-generation diesel models allow standard OBD read/write within the MQB platform.
On pre-2017 Audi models, Stage 1 is flashed via OBD without bench. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential.
Tiptronic is Audi's classic automatic for longitudinally mounted engines. S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range). S tronic comes in dry and wet-clutch versions, each with a different torque rating.
Frequently asked questions
How much horsepower does Stage 1 add for the Audi Q5 3.0 TDI 245 hp?
Stage 1 chip tuning on the Audi Q5 3.0 TDI 245 hp boosts engine output by 55 hp: from 245 to 300 hp. Torque rises from 500 to 620 Nm (+120 Nm).
What changes in the Audi Q5 ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Audi Q5 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +55 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Audi Q5?
Stage 1 on the powerful Audi Q5 3.0 TDI 245 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Audi Q5 3.0 TDI 245 hp?
Stage 2 for the Audi Q5 3.0 TDI 245 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Audi Q5 3.0 TDI 245 hp built with?
The Audi Q5 3.0 TDI 245 hp comes with 3 ECU variants: Bosch EDC17CP04, Bosch EDC17CP44, Bosch MD1CP004. Calibration is done for the specific unit after the revision is identified.
Can all the gearbox variants (ZF AL552, Temic DL501) on the Audi Q5 be calibrated?
The Audi Q5 3.0 TDI 245 hp has 2 TCU variants: ZF AL552, Temic DL501. Remapping the gearbox is essential after Stage 1 — the factory torque limiter is usually below what the engine can deliver.
Does the factory warranty of the Audi Q5 remain valid after Stage 1?
After remapping the Audi Q5, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi Q5?
Reading and writing via OBD takes 25-30 minutes on the Audi Q5. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi Q5?
Before Stage 1 the original of the Audi Q5 3.0 TDI 245 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi Q5 3.0 TDI 245 hp cost?
The remap price for the Audi Q5 3.0 TDI 245 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.