Audi Q5 2.0 TDI CR EU6 136 hp — Stage 1 file (+49 hp)
hp
Stage 1 file for Audi Q5 2.0 TDI CR EU6 136 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi Q5 2.0 TDI CR EU6 136 hp ECU
Audi Q5 (2012 - 8R) 2.0 TDI CR EU6 136 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 136 to 185 hp (+49 hp, +36%) and torque from 320 to 410 Nm (+90 Nm). This engine ships with different ECU variants: Bosch EDC17C54, Bosch EDC17C64, Bosch EDC17C74, Siemens/Continental SID603. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ250 (MQB), Bosch DQ38x, Bosch DQ500 (MQB) — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 14 configurations · 7 ECU variants. The 2012 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
quattro is Audi's signature all-wheel-drive system, introduced in 1980. The four rings in the Audi logo are a legacy of the 1932 Auto Union merger of Audi, Horch, DKW and Wanderer. The Audi community is one of the most active in Europe for chip tuning. The factory calibration of Audi diesels is conservative, leaving headroom for Stage 1. Audi is the originator of mass-market TDI passenger-car engines in Europe. Mid-range Audi diesels are a mainstream chip tuning subject across Europe.
The Audi community is renowned for its active tuning scene and a huge library of available Stage files. Within the VAG group, ECUs are standardised, so a single file often fits a dozen models across Audi/VW/Skoda/Seat. APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe.
S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range). S tronic comes in dry and wet-clutch versions, each with a different torque rating. The S tronic TCU requires calibration at Stage 1+, as the torque limiter usually sits below the engine's potential.
Frequently asked questions
What is the Stage 1 effect on the Audi Q5 2.0 TDI CR EU6 136 hp?
After Stage 1 the power of the Audi Q5 2.0 TDI CR EU6 136 hp rises from 136 to 185 hp, a gain of 49 hp (+36%). Torque rises from 320 to 410 Nm (+90 Nm).
How does Stage 1 differ from stock on the Audi Q5?
Stage 1 chip tuning of the Audi Q5 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +49 hp with no hardware changes.
Can you do Stage 1 on the Audi Q5 2.0 TDI CR EU6 136 hp?
Yes, Stage 1 for the Audi Q5 2.0 TDI CR EU6 136 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Audi Q5?
Stage 2 on the Audi Q5 2.0 TDI CR EU6 136 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Audi Q5 2.0 TDI CR EU6 136 hp?
The Audi Q5 2.0 TDI CR EU6 136 hp was fitted with different ECUs depending on the year and trim: Bosch EDC17C54, Bosch EDC17C64, Bosch EDC17C74, Siemens/Continental SID603. The write method (OBD, Bench, Boot) is determined when the unit is read.
How many TCU units does the Audi Q5 2.0 TDI CR EU6 136 hp have?
The Audi Q5 2.0 TDI CR EU6 136 hp comes with 3 different automatic-transmission TCU units: Temic DQ250 (MQB), Bosch DQ38x, Bosch DQ500 (MQB). Each is calibrated with a separate file — torque limit, shift maps and launch control rpm for Stage 1.
What happens to the Audi Q5 warranty after chip tuning?
The factory warranty of the Audi Q5 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Audi Q5 take?
On the Audi Q5 2.0 TDI CR EU6 136 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Audi Q5?
Yes, the original ECU firmware of the Audi Q5 2.0 TDI CR EU6 136 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Audi Q5?
Stage 1 for the Audi Q5 2.0 TDI CR EU6 136 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.