Audi Q5 2.0 TDI CR 136 hp — Stage 1 file (+49 hp)
hp
Stage 1 file for Audi Q5 2.0 TDI CR 136 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi Q5 2.0 TDI CR 136 hp ECU
Audi Q5 (2012 - 8R) 2.0 TDI CR 136 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 136 to 185 hp (+49 hp, +36%) and torque from 320 to 410 Nm (+90 Nm). This engine ships with different ECU variants: Bosch EDC17C46, Bosch EDC17C54, Bosch EDC17CP14, Bosch EDC17CP20. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ250E, Temic DQ250F — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 12 configurations · 6 ECU variants. A diesel built in 2012 — the Tricore ECU era; OBD flash works on most production revisions.
Audi's petrol range is badged TFSI, and the diesel range TDI. quattro is Audi's signature all-wheel-drive system, introduced in 1980. The four rings in the Audi logo are a legacy of the 1932 Auto Union merger of Audi, Horch, DKW and Wanderer. Audi S models with a diesel engine use an electrically driven compressor to eliminate turbo lag. The factory calibration of Audi diesels is conservative, leaving headroom for Stage 1. Audi is the originator of mass-market TDI passenger-car engines in Europe.
Within the VAG group, ECUs are standardised, so a single file often fits a dozen models across Audi/VW/Skoda/Seat. APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. On Audi, Stage 1 usually fits within the standard turnaround time. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life.
S tronic comes in dry and wet-clutch versions, each with a different torque rating. The S tronic TCU requires calibration at Stage 1+, as the torque limiter usually sits below the engine's potential. Tiptronic is Audi's classic automatic for longitudinally mounted engines.
Frequently asked questions
How much does the power of the Audi Q5 2.0 TDI CR 136 hp increase after Stage 1?
Stage 1 for the Audi Q5 2.0 TDI CR 136 hp adds +49 hp — power increases from 136 to 185 hp (+36%). Torque rises from 320 to 410 Nm (+90 Nm).
What does a Stage 1 remap of the Audi Q5 2.0 TDI CR 136 hp include?
Stage 1 on the Audi Q5 2.0 TDI CR 136 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +49 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 TDI CR 136 hp?
Stage 1 on the Audi Q5 2.0 TDI CR 136 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Audi Q5 2.0 TDI CR 136 hp?
Stage 2 for the Audi Q5 2.0 TDI CR 136 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Audi Q5 2.0 TDI CR 136 hp have?
The Audi Q5 2.0 TDI CR 136 hp has 4 ECU variants: Bosch EDC17C46, Bosch EDC17C54, Bosch EDC17CP14, Bosch EDC17CP20. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Which TCUs are found on the Audi Q5 2.0 TDI CR 136 hp?
The Audi Q5 2.0 TDI CR 136 hp was fitted with different automatic-transmission units: Temic DQ250E, Temic DQ250F. All are supported via Bench reading; the Stage 1 calibration is done for the specific TCU after the revision is identified.
Does Stage 1 void the warranty on the Audi Q5?
Stage 1 on the Audi Q5 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Audi Q5 2.0 TDI CR 136 hp done?
The full remap cycle for the Audi Q5 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Audi Q5?
The original Audi Q5 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Audi Q5 2.0 TDI CR 136 hp?
The cost of Stage 1 for the Audi Q5 2.0 TDI CR 136 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.