Audi Q3 45 TFSI (2.0) 230 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Audi Q3 45 TFSI (2.0) 230 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi Q3 45 TFSI (2.0) 230 hp ECU
Audi Q3 (2018 - F3) 45 TFSI (2.0) 230 hp — premium petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 230 to 280 hp (+50 hp, +22%) and torque from 350 to 420 Nm (+70 Nm). ECU — Siemens/Continental Simos18.4. Flashing method: OBD or Bench depending on the unit's protection. A modern petrol engine built in 2018 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Audi is a premium manufacturer from Ingolstadt (Bavaria), founded in 1909 as Audiwerke August Horch & Cie. Audi's petrol range is badged TFSI, and the diesel range TDI. quattro is Audi's signature all-wheel-drive system, introduced in 1980. TFSI is Audi's signature designation for direct-injection petrol turbo engines.
The Audi community is renowned for its active tuning scene and a huge library of available Stage files. APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. Audi S models sit between the standard cars and the RS range. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential.
Frequently asked questions
How much horsepower does Stage 1 add for the Audi Q3 45 TFSI (2.0) 230 hp?
After Stage 1 the power of the Audi Q3 45 TFSI (2.0) 230 hp rises from 230 to 280 hp, a gain of 50 hp (+22%). Torque rises from 350 to 420 Nm (+70 Nm).
How does Stage 1 differ from stock on the Audi Q3?
Stage 1 is a software optimization of the factory ECU firmware of the Audi Q3 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +50 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Audi Q3?
The high-output Audi Q3 45 TFSI (2.0) 230 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Audi Q3 45 TFSI (2.0) 230 hp?
Stage 2 on the Audi Q3 45 TFSI (2.0) 230 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Audi Q3 45 TFSI (2.0) 230 hp use?
The Audi Q3 45 TFSI (2.0) 230 hp is fitted with the Siemens/Continental Simos18.4 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Audi Q3 remain valid after Stage 1?
After remapping the Audi Q3, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi Q3?
Reading and writing via OBD takes 25-30 minutes on the Audi Q3. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi Q3?
Before Stage 1 the original of the Audi Q3 45 TFSI (2.0) 230 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi Q3 45 TFSI (2.0) 230 hp cost?
The remap price for the Audi Q3 45 TFSI (2.0) 230 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.