Audi Q3 40 TDI (2.0) 190 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Audi Q3 40 TDI (2.0) 190 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi Q3 40 TDI (2.0) 190 hp ECU
Audi Q3 (2018 - F3) 40 TDI (2.0) 190 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 190 to 225 hp (+35 hp, +18%) and torque from 380 to 460 Nm (+80 Nm). This engine ships with different ECU variants: Bosch MD1CP004, Bosch MD1CS004. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A 2018 diesel — a modern platform protected by RSA + checksum encryption; top models require BDM/JTAG.
The e-tron line is Audi's EV range within the VAG group. Audi is part of the Volkswagen Group (VAG), Europe's largest automotive group. Audi Sport is Audi's performance division, building the RS models. The European TDI community is the world's largest for passenger-car diesel chip tuning. The Audi diesel range is fully unified with Volkswagen, Skoda and Seat within VAG. On modern Audi diesels, the Tricore TPROT protection often requires a Bench read.
The Audi community is renowned for its active tuning scene and a huge library of available Stage files. APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. On mid-range Audi diesels, Stage 1 delivers a noticeable torque gain. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life.
Frequently asked questions
How much horsepower does Stage 1 add for the Audi Q3 40 TDI (2.0) 190 hp?
Stage 1 for the Audi Q3 40 TDI (2.0) 190 hp adds +35 hp — power increases from 190 to 225 hp (+18%). Torque rises from 380 to 460 Nm (+80 Nm).
What does a Stage 1 remap of the Audi Q3 40 TDI (2.0) 190 hp include?
Stage 1 chip tuning of the Audi Q3 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +35 hp with no hardware changes.
Can you do Stage 1 on the Audi Q3 40 TDI (2.0) 190 hp?
Yes, Stage 1 for the Audi Q3 40 TDI (2.0) 190 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Audi Q3?
Stage 2 for the Audi Q3 40 TDI (2.0) 190 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the Audi Q3 40 TDI (2.0) 190 hp?
The Audi Q3 40 TDI (2.0) 190 hp was fitted with different ECUs depending on the year and trim: Bosch MD1CP004, Bosch MD1CS004. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Audi Q3 warranty after chip tuning?
The factory warranty of the Audi Q3 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Audi Q3 take?
On the Audi Q3 40 TDI (2.0) 190 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Audi Q3?
Yes, the original ECU firmware of the Audi Q3 40 TDI (2.0) 190 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Audi Q3?
Stage 1 for the Audi Q3 40 TDI (2.0) 190 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.