Audi Q3 35 TFSI 170 hp — Stage 1 file (+90 hp)
hp
Stage 1 file for Audi Q3 35 TFSI 170 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi Q3 35 TFSI 170 hp ECU
Audi Q3 (2011 - 8U) 35 TFSI 170 hp — premium petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 170 to 260 hp (+90 hp, +53%) and torque from 280 to 400 Nm (+120 Nm). ECU — Bosch MED17.5. Flashing method: OBD or Bench depending on the unit's protection. The 2011 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Audi is a premium manufacturer from Ingolstadt (Bavaria), founded in 1909 as Audiwerke August Horch & Cie. Audi's petrol range is badged TFSI, and the diesel range TDI. quattro is Audi's signature all-wheel-drive system, introduced in 1980. TFSI is Audi's signature designation for direct-injection petrol turbo engines.
APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. On Audi, Stage 1 usually fits within the standard turnaround time. On pre-2017 Audi models, Stage 1 is flashed via OBD without bench. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe.
Frequently asked questions
How much horsepower does Stage 1 add for the Audi Q3 35 TFSI 170 hp?
After Stage 1 the power of the Audi Q3 35 TFSI 170 hp rises from 170 to 260 hp, a gain of 90 hp (+53%). Torque rises from 280 to 400 Nm (+120 Nm).
How does Stage 1 differ from stock on the Audi Q3?
Stage 1 is a software optimization of the factory ECU firmware of the Audi Q3 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +90 hp with no hardware changes.
What is the risk of Stage 1 on the Audi Q3 35 TFSI 170 hp?
A remap of the Audi Q3 35 TFSI 170 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Audi Q3 35 TFSI 170 hp?
Stage 2 on the Audi Q3 35 TFSI 170 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Audi Q3 35 TFSI 170 hp use?
The Audi Q3 35 TFSI 170 hp is fitted with the Bosch MED17.5 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Audi Q3 remain valid after Stage 1?
After remapping the Audi Q3, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi Q3?
Reading and writing via OBD takes 25-30 minutes on the Audi Q3. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi Q3?
Before Stage 1 the original of the Audi Q3 35 TFSI 170 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi Q3 35 TFSI 170 hp cost?
The remap price for the Audi Q3 35 TFSI 170 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.