Audi Q3 2.0 TDI CR EU6 120 hp — Stage 1 file (+65 hp)
hp
Stage 1 file for Audi Q3 2.0 TDI CR EU6 120 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi Q3 2.0 TDI CR EU6 120 hp ECU
Audi Q3 (2011 - 8U) 2.0 TDI CR EU6 120 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 120 to 185 hp (+65 hp, +54%) and torque from 290 to 410 Nm (+120 Nm). ECU — Bosch EDC17C64. Flashing method: OBD or Bench depending on the unit's protection. A diesel built in 2011 — the Tricore ECU era; OBD flash works on most production revisions.
Audi's signature slogan is “Vorsprung durch Technik” (Progress through Technology). Audi is a premium manufacturer from Ingolstadt (Bavaria), founded in 1909 as Audiwerke August Horch & Cie. Audi's petrol range is badged TFSI, and the diesel range TDI. DPF/SCR with AdBlue is standard on all Euro-6 Audi diesels. TDI is Audi's signature designation for direct-injection turbo diesels, in production since 1989. Audi S models with a diesel engine use an electrically driven compressor to eliminate turbo lag.
On mid-range Audi diesels, Stage 1 delivers a noticeable torque gain. The Audi community is renowned for its active tuning scene and a huge library of available Stage files. Within the VAG group, ECUs are standardised, so a single file often fits a dozen models across Audi/VW/Skoda/Seat. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life.
Frequently asked questions
How many horsepower does the Audi Q3 2.0 TDI CR EU6 120 hp reach after a remap?
Stage 1 for the Audi Q3 2.0 TDI CR EU6 120 hp adds +65 hp — power increases from 120 to 185 hp (+54%). Torque rises from 290 to 410 Nm (+120 Nm).
What does a Stage 1 remap of the Audi Q3 2.0 TDI CR EU6 120 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Audi Q3 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +65 hp with no hardware changes.
What is the risk of Stage 1 on the Audi Q3 2.0 TDI CR EU6 120 hp?
A remap of the Audi Q3 2.0 TDI CR EU6 120 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Audi Q3 2.0 TDI CR EU6 120 hp?
Stage 2 for the Audi Q3 2.0 TDI CR EU6 120 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Audi Q3 2.0 TDI CR EU6 120 hp use?
The Audi Q3 2.0 TDI CR EU6 120 hp is fitted with the Bosch EDC17C64 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Audi Q3 remain valid after Stage 1?
After remapping the Audi Q3, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi Q3?
Reading and writing via OBD takes 25-30 minutes on the Audi Q3. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi Q3?
Before Stage 1 the original of the Audi Q3 2.0 TDI CR EU6 120 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi Q3 2.0 TDI CR EU6 120 hp cost?
The remap price for the Audi Q3 2.0 TDI CR EU6 120 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.