Audi Q2 30 TDI (1.6) 116 hp — Stage 1 file (+24 hp)
hp
Stage 1 file for Audi Q2 30 TDI (1.6) 116 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi Q2 30 TDI (1.6) 116 hp ECU
Audi Q2 (2016) 30 TDI (1.6) 116 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 116 to 140 hp (+24 hp, +21%) and torque from 250 to 300 Nm (+50 Nm). ECU — Bosch MD1CP004. Flashing method: OBD or Bench depending on the unit's protection. The 2016 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Audi shares platforms with Volkswagen, Porsche, Bentley and Lamborghini within VAG. Audi's signature slogan is “Vorsprung durch Technik” (Progress through Technology). Audi is a premium manufacturer from Ingolstadt (Bavaria), founded in 1909 as Audiwerke August Horch & Cie. The MQB platform lets a single calibration cover Audi/VW/Skoda/Seat. DPF/SCR with AdBlue is standard on all Euro-6 Audi diesels. TDI is Audi's signature designation for direct-injection turbo diesels, in production since 1989.
APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. On Audi, Stage 1 usually fits within the standard turnaround time. On pre-2017 Audi models, Stage 1 is flashed via OBD without bench. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe.
Frequently asked questions
What power gain do you get after chip tuning the Audi Q2 30 TDI (1.6) 116 hp?
After Stage 1 the power of the Audi Q2 30 TDI (1.6) 116 hp rises from 116 to 140 hp, a gain of 24 hp (+21%). Torque rises from 250 to 300 Nm (+50 Nm).
How does Stage 1 differ from stock on the Audi Q2?
Stage 1 is a software optimization of the factory ECU firmware of the Audi Q2 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +24 hp with no hardware changes.
What is the risk of Stage 1 on the Audi Q2 30 TDI (1.6) 116 hp?
A remap of the Audi Q2 30 TDI (1.6) 116 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Audi Q2 30 TDI (1.6) 116 hp?
Stage 2 on the Audi Q2 30 TDI (1.6) 116 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Audi Q2 30 TDI (1.6) 116 hp use?
The Audi Q2 30 TDI (1.6) 116 hp is fitted with the Bosch MD1CP004 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Audi Q2 remain valid after Stage 1?
After remapping the Audi Q2, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi Q2?
Reading and writing via OBD takes 25-30 minutes on the Audi Q2. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi Q2?
Before Stage 1 the original of the Audi Q2 30 TDI (1.6) 116 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi Q2 30 TDI (1.6) 116 hp cost?
The remap price for the Audi Q2 30 TDI (1.6) 116 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.