Audi A7 40 TDI (2.0) 204 hp — Stage 1 file (+46 hp)
hp
Stage 1 file for Audi A7 40 TDI (2.0) 204 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A7 40 TDI (2.0) 204 hp ECU
Audi A7 (2018 - 4K8) 40 TDI (2.0) 204 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 204 to 250 hp (+46 hp, +23%) and torque from 400 to 480 Nm (+80 Nm). This engine ships with different ECU variants: Bosch MD1CP004, Bosch MD1CS004. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A 2018 diesel — a modern platform protected by RSA + checksum encryption; top models require BDM/JTAG.
The e-tron line is Audi's EV range within the VAG group. Audi is part of the Volkswagen Group (VAG), Europe's largest automotive group. Audi Sport is Audi's performance division, building the RS models. The European TDI community is the world's largest for passenger-car diesel chip tuning. The Audi diesel range is fully unified with Volkswagen, Skoda and Seat within VAG. On modern Audi diesels, the Tricore TPROT protection often requires a Bench read.
On the Audi Q-series diesel SUVs, Stage 1 focuses on torque. The Audi community is renowned for its active tuning scene and a huge library of available Stage files. Within the VAG group, ECUs are standardised, so a single file often fits a dozen models across Audi/VW/Skoda/Seat. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential.
Frequently asked questions
How much horsepower does Stage 1 add for the Audi A7 40 TDI (2.0) 204 hp?
Stage 1 for the Audi A7 40 TDI (2.0) 204 hp adds +46 hp — power increases from 204 to 250 hp (+23%). Torque rises from 400 to 480 Nm (+80 Nm).
What does a Stage 1 remap of the Audi A7 40 TDI (2.0) 204 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Audi A7 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +46 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Audi A7?
Stage 1 on the powerful Audi A7 40 TDI (2.0) 204 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Audi A7 40 TDI (2.0) 204 hp?
Stage 2 for the Audi A7 40 TDI (2.0) 204 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Audi A7 40 TDI (2.0) 204 hp built with?
The Audi A7 40 TDI (2.0) 204 hp comes with 2 ECU variants: Bosch MD1CP004, Bosch MD1CS004. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Audi A7 remain valid after Stage 1?
After remapping the Audi A7, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi A7?
Reading and writing via OBD takes 25-30 minutes on the Audi A7. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi A7?
Before Stage 1 the original of the Audi A7 40 TDI (2.0) 204 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi A7 40 TDI (2.0) 204 hp cost?
The remap price for the Audi A7 40 TDI (2.0) 204 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.