Audi A6 50 TFSIe (2.0) EU6d 299 hp — Stage 1 file (+101 hp)
hp
Stage 1 file for Audi A6 50 TFSIe (2.0) EU6d 299 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A6 50 TFSIe (2.0) EU6d 299 hp ECU
Audi A6 (2018 - C8) 50 TFSIe (2.0) EU6d 299 hp — premium hybrid engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 299 to 400 hp (+101 hp, +34%) and torque from 450 to 580 Nm (+130 Nm).
Audi's petrol range is badged TFSI, and the diesel range TDI. quattro is Audi's signature all-wheel-drive system, introduced in 1980. The four rings in the Audi logo are a legacy of the 1932 Auto Union merger of Audi, Horch, DKW and Wanderer. On PHEV Audi models, the ICE side is tuned just like a pure combustion engine. PHEV variants are available across most Audi series. TFSI e is Audi's PHEV designation (a TFSI engine combined with an electric motor).
APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. Audi S models sit between the standard cars and the RS range. Within the VAG group, ECUs are standardised, so a single file often fits a dozen models across Audi/VW/Skoda/Seat. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential.
Frequently asked questions
How much does the power of the Audi A6 50 TFSIe (2.0) EU6d 299 hp increase after Stage 1?
Stage 1 for the Audi A6 50 TFSIe (2.0) EU6d 299 hp adds +101 hp — power increases from 299 to 400 hp (+34%). Torque rises from 450 to 580 Nm (+130 Nm).
What does a Stage 1 remap of the Audi A6 50 TFSIe (2.0) EU6d 299 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Audi A6 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +101 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Audi A6?
Stage 1 on the powerful Audi A6 50 TFSIe (2.0) EU6d 299 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Audi A6 50 TFSIe (2.0) EU6d 299 hp?
Stage 2 for the Audi A6 50 TFSIe (2.0) EU6d 299 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Audi A6 remain valid after Stage 1?
After remapping the Audi A6, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi A6?
Reading and writing via OBD takes 25-30 minutes on the Audi A6. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi A6?
Before Stage 1 the original of the Audi A6 50 TFSIe (2.0) EU6d 299 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi A6 50 TFSIe (2.0) EU6d 299 hp cost?
The remap price for the Audi A6 50 TFSIe (2.0) EU6d 299 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.