Audi A6 45 TDI (3.0) 231 hp — Stage 1 file (+109 hp)
hp
Stage 1 file for Audi A6 45 TDI (3.0) 231 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A6 45 TDI (3.0) 231 hp ECU
Audi A6 (2018 - C8) 45 TDI (3.0) 231 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 231 to 340 hp (+109 hp, +47%) and torque from 500 to 720 Nm (+220 Nm). ECU — Bosch MD1CP004. Flashing method: OBD or Bench depending on the unit's protection. A 2018 diesel — a modern platform protected by RSA + checksum encryption; top models require BDM/JTAG.
Audi's signature slogan is “Vorsprung durch Technik” (Progress through Technology). Audi is a premium manufacturer from Ingolstadt (Bavaria), founded in 1909 as Audiwerke August Horch & Cie. Audi's petrol range is badged TFSI, and the diesel range TDI. DPF/SCR with AdBlue is standard on all Euro-6 Audi diesels. TDI is Audi's signature designation for direct-injection turbo diesels, in production since 1989. Audi S models with a diesel engine use an electrically driven compressor to eliminate turbo lag.
On the Audi Q-series diesel SUVs, Stage 1 focuses on torque. The Audi community is renowned for its active tuning scene and a huge library of available Stage files. Within the VAG group, ECUs are standardised, so a single file often fits a dozen models across Audi/VW/Skoda/Seat. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential.
Frequently asked questions
How many horsepower does the Audi A6 45 TDI (3.0) 231 hp reach after a remap?
Stage 1 chip tuning on the Audi A6 45 TDI (3.0) 231 hp boosts engine output by 109 hp: from 231 to 340 hp. Torque rises from 500 to 720 Nm (+220 Nm).
What changes in the Audi A6 ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Audi A6 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +109 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Audi A6?
Stage 1 on the powerful Audi A6 45 TDI (3.0) 231 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Audi A6 45 TDI (3.0) 231 hp?
Stage 2 for the Audi A6 45 TDI (3.0) 231 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Audi A6 45 TDI (3.0) 231 hp use?
The Audi A6 45 TDI (3.0) 231 hp is fitted with the Bosch MD1CP004 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Audi A6 remain valid after Stage 1?
After remapping the Audi A6, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi A6?
Reading and writing via OBD takes 25-30 minutes on the Audi A6. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi A6?
Before Stage 1 the original of the Audi A6 45 TDI (3.0) 231 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi A6 45 TDI (3.0) 231 hp cost?
The remap price for the Audi A6 45 TDI (3.0) 231 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.