Audi A6 40 TFSI (2.0) MHEV 204 hp — Stage 1 file (+100 hp)
hp
Stage 1 file for Audi A6 40 TFSI (2.0) MHEV 204 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A6 40 TFSI (2.0) MHEV 204 hp ECU
Audi A6 (2018 - C8) 40 TFSI (2.0) MHEV 204 hp — premium petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 204 to 304 hp (+100 hp, +49%) and torque from 320 to 420 Nm (+100 Nm). This engine ships with different ECU variants: Bosch MG1CS031, Siemens/Continental Simos19.7. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern petrol engine built in 2018 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Audi is part of the Volkswagen Group (VAG), Europe's largest automotive group. Audi Sport is Audi's performance division, building the RS models. Audi shares platforms with Volkswagen, Porsche, Bentley and Lamborghini within VAG. The factory calibration of Audi petrol engines is conservative, leaving headroom for Stage 1.
APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. Audi S models sit between the standard cars and the RS range. Within the VAG group, ECUs are standardised, so a single file often fits a dozen models across Audi/VW/Skoda/Seat. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential.
Frequently asked questions
How much does the power of the Audi A6 40 TFSI (2.0) MHEV 204 hp increase after Stage 1?
The Stage 1 gain for the Audi A6 40 TFSI (2.0) MHEV 204 hp is 100 hp (+49%) over the stock 204 hp, for a total of 304 hp. Torque rises from 320 to 420 Nm (+100 Nm).
What is Stage 1 chip tuning for the Audi A6?
Stage 1 is a software optimization of the factory ECU firmware of the Audi A6 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +100 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Audi A6?
The high-output Audi A6 40 TFSI (2.0) MHEV 204 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Audi A6 40 TFSI (2.0) MHEV 204 hp?
Stage 2 on the Audi A6 40 TFSI (2.0) MHEV 204 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Audi A6 40 TFSI (2.0) MHEV 204 hp built with?
The Audi A6 40 TFSI (2.0) MHEV 204 hp comes with 2 ECU variants: Bosch MG1CS031, Siemens/Continental Simos19.7. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Audi A6 remain valid after Stage 1?
After remapping the Audi A6, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi A6?
Reading and writing via OBD takes 25-30 minutes on the Audi A6. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi A6?
Before Stage 1 the original of the Audi A6 40 TFSI (2.0) MHEV 204 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi A6 40 TFSI (2.0) MHEV 204 hp cost?
The remap price for the Audi A6 40 TFSI (2.0) MHEV 204 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.