Audi A6 35 TDI (2.0) 163 hp — Stage 1 file (+67 hp)
hp
Stage 1 file for Audi A6 35 TDI (2.0) 163 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A6 35 TDI (2.0) 163 hp ECU
Audi A6 (2018 - C8) 35 TDI (2.0) 163 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 163 to 230 hp (+67 hp, +41%) and torque from 340 to 450 Nm (+110 Nm). This engine ships with different ECU variants: Bosch EDC17C74, Bosch MD1CP004. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A 2018 diesel — a modern platform protected by RSA + checksum encryption; top models require BDM/JTAG.
The e-tron line is Audi's EV range within the VAG group. Audi is part of the Volkswagen Group (VAG), Europe's largest automotive group. Audi Sport is Audi's performance division, building the RS models. The European TDI community is the world's largest for passenger-car diesel chip tuning. The Audi diesel range is fully unified with Volkswagen, Skoda and Seat within VAG. On modern Audi diesels, the Tricore TPROT protection often requires a Bench read.
The Audi community is renowned for its active tuning scene and a huge library of available Stage files. APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. On mid-range Audi diesels, Stage 1 delivers a noticeable torque gain. The MQB platform is the most refined chip tuning segment in Europe. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes.
Frequently asked questions
How much horsepower does Stage 1 add for the Audi A6 35 TDI (2.0) 163 hp?
Stage 1 chip tuning on the Audi A6 35 TDI (2.0) 163 hp boosts engine output by 67 hp: from 163 to 230 hp. Torque rises from 340 to 450 Nm (+110 Nm).
What changes in the Audi A6 ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Audi A6 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +67 hp with no hardware changes.
What is the risk of Stage 1 on the Audi A6 35 TDI (2.0) 163 hp?
A remap of the Audi A6 35 TDI (2.0) 163 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Audi A6 35 TDI (2.0) 163 hp?
Stage 2 for the Audi A6 35 TDI (2.0) 163 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Audi A6 35 TDI (2.0) 163 hp built with?
The Audi A6 35 TDI (2.0) 163 hp comes with 2 ECU variants: Bosch EDC17C74, Bosch MD1CP004. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Audi A6 remain valid after Stage 1?
After remapping the Audi A6, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi A6?
Reading and writing via OBD takes 25-30 minutes on the Audi A6. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi A6?
Before Stage 1 the original of the Audi A6 35 TDI (2.0) 163 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi A6 35 TDI (2.0) 163 hp cost?
The remap price for the Audi A6 35 TDI (2.0) 163 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.