Audi A6 30 TDI (2.0) 136 hp — Stage 1 file (+49 hp)
hp
Stage 1 file for Audi A6 30 TDI (2.0) 136 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A6 30 TDI (2.0) 136 hp ECU
Audi A6 (2018 - C8) 30 TDI (2.0) 136 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 136 to 185 hp (+49 hp, +36%) and torque from 320 to 400 Nm (+80 Nm). This engine ships with different ECU variants: Bosch EDC17C74, Bosch MD1CS004. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern diesel built in 2018 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
The Audi community is one of the most active in Europe for chip tuning. The e-tron line is Audi's EV range within the VAG group. Audi is part of the Volkswagen Group (VAG), Europe's largest automotive group. Mid-range Audi diesels are a mainstream chip tuning subject across Europe. The Audi diesel range is fully unified with Volkswagen, Skoda and Seat within VAG. On modern Audi diesels, the Tricore TPROT protection often requires a Bench read.
On Audi, Stage 1 usually fits within the standard turnaround time. The Audi community is renowned for its active tuning scene and a huge library of available Stage files. APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe.
Frequently asked questions
How many horsepower does the Audi A6 30 TDI (2.0) 136 hp reach after a remap?
After Stage 1 the power of the Audi A6 30 TDI (2.0) 136 hp rises from 136 to 185 hp, a gain of 49 hp (+36%). Torque rises from 320 to 400 Nm (+80 Nm).
How does Stage 1 differ from stock on the Audi A6?
Stage 1 is a software optimization of the factory ECU firmware of the Audi A6 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +49 hp with no hardware changes.
What is the risk of Stage 1 on the Audi A6 30 TDI (2.0) 136 hp?
A remap of the Audi A6 30 TDI (2.0) 136 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Audi A6 30 TDI (2.0) 136 hp?
Stage 2 on the Audi A6 30 TDI (2.0) 136 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Audi A6 30 TDI (2.0) 136 hp built with?
The Audi A6 30 TDI (2.0) 136 hp comes with 2 ECU variants: Bosch EDC17C74, Bosch MD1CS004. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Audi A6 remain valid after Stage 1?
After remapping the Audi A6, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi A6?
Reading and writing via OBD takes 25-30 minutes on the Audi A6. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi A6?
Before Stage 1 the original of the Audi A6 30 TDI (2.0) 136 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi A6 30 TDI (2.0) 136 hp cost?
The remap price for the Audi A6 30 TDI (2.0) 136 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.