Audi A6 3.0 TDI 313 hp — Stage 1 file (+37 hp)
hp
Stage 1 file for Audi A6 3.0 TDI 313 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A6 3.0 TDI 313 hp ECU
Audi A6 (2011 - C7) 3.0 TDI 313 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 313 to 350 hp (+37 hp, +12%) and torque from 650 to 720 Nm (+70 Nm). ECU — Bosch EDC17CP44. Flashing method: OBD or Bench depending on the unit's protection. TCU units on this engine: ZF ALx51, Temic DL501 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 3 configurations · 3 ECU variants. A diesel built in 2011 — the Tricore ECU era; OBD flash works on most production revisions.
The e-tron line is Audi's EV range within the VAG group. Audi is part of the Volkswagen Group (VAG), Europe's largest automotive group. Audi Sport is Audi's performance division, building the RS models. The European TDI community is the world's largest for passenger-car diesel chip tuning. The Audi diesel range is fully unified with Volkswagen, Skoda and Seat within VAG. Mid-generation diesel models allow standard OBD read/write within the MQB platform.
On the Audi Q-series diesel SUVs, Stage 1 focuses on torque. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential.
Tiptronic is Audi's classic automatic for longitudinally mounted engines. S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range). S tronic comes in dry and wet-clutch versions, each with a different torque rating.
Frequently asked questions
How much horsepower does Stage 1 add for the Audi A6 3.0 TDI 313 hp?
Stage 1 chip tuning on the Audi A6 3.0 TDI 313 hp boosts engine output by 37 hp: from 313 to 350 hp. Torque rises from 650 to 720 Nm (+70 Nm).
What changes in the Audi A6 ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Audi A6 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +37 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Audi A6?
Stage 1 on the powerful Audi A6 3.0 TDI 313 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Audi A6 3.0 TDI 313 hp?
Stage 2 for the Audi A6 3.0 TDI 313 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Audi A6 3.0 TDI 313 hp use?
The Audi A6 3.0 TDI 313 hp is fitted with the Bosch EDC17CP44 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Can all the gearbox variants (ZF ALx51, Temic DL501) on the Audi A6 be calibrated?
The Audi A6 3.0 TDI 313 hp has 2 TCU variants: ZF ALx51, Temic DL501. Remapping the gearbox is essential after Stage 1 — the factory torque limiter is usually below what the engine can deliver.
Does the factory warranty of the Audi A6 remain valid after Stage 1?
After remapping the Audi A6, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi A6?
Reading and writing via OBD takes 25-30 minutes on the Audi A6. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi A6?
Before Stage 1 the original of the Audi A6 3.0 TDI 313 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi A6 3.0 TDI 313 hp cost?
The remap price for the Audi A6 3.0 TDI 313 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.