Audi A6 2.0 TDI CR 163 hp — Stage 1 file (+42 hp)
hp
Stage 1 file for Audi A6 2.0 TDI CR 163 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A6 2.0 TDI CR 163 hp ECU
Audi A6 (2011 - C7) 2.0 TDI CR 163 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 163 to 205 hp (+42 hp, +26%) and torque from 350 to 420 Nm (+70 Nm). This engine ships with different ECU variants: Bosch EDC17C46, Bosch EDC17C64, Bosch EDC17CP14, Bosch EDC17CP20. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ250 (MQB), Temic DQ250E, Temic DQ250F — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 14 configurations · 7 ECU variants. The 2011 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The Audi community is one of the most active in Europe for chip tuning. The e-tron line is Audi's EV range within the VAG group. Audi is part of the Volkswagen Group (VAG), Europe's largest automotive group. Mid-range Audi diesels are a mainstream chip tuning subject across Europe. The Audi diesel range is fully unified with Volkswagen, Skoda and Seat within VAG. Mid-generation diesel models allow standard OBD read/write within the MQB platform.
APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. On Audi, Stage 1 usually fits within the standard turnaround time. On pre-2017 Audi models, Stage 1 is flashed via OBD without bench. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe.
S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range). S tronic comes in dry and wet-clutch versions, each with a different torque rating. The S tronic TCU requires calibration at Stage 1+, as the torque limiter usually sits below the engine's potential.
Frequently asked questions
How many horsepower does the Audi A6 2.0 TDI CR 163 hp reach after a remap?
After Stage 1 the power of the Audi A6 2.0 TDI CR 163 hp rises from 163 to 205 hp, a gain of 42 hp (+26%). Torque rises from 350 to 420 Nm (+70 Nm).
How does Stage 1 differ from stock on the Audi A6?
Stage 1 is a software optimization of the factory ECU firmware of the Audi A6 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +42 hp with no hardware changes.
What is the risk of Stage 1 on the Audi A6 2.0 TDI CR 163 hp?
A remap of the Audi A6 2.0 TDI CR 163 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Audi A6 2.0 TDI CR 163 hp?
Stage 2 on the Audi A6 2.0 TDI CR 163 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Audi A6 2.0 TDI CR 163 hp built with?
The Audi A6 2.0 TDI CR 163 hp comes with 4 ECU variants: Bosch EDC17C46, Bosch EDC17C64, Bosch EDC17CP14, Bosch EDC17CP20. Calibration is done for the specific unit after the revision is identified.
Can all the gearbox variants (Temic DQ250 (MQB), Temic DQ250E, Temic DQ250F) on the Audi A6 be calibrated?
The Audi A6 2.0 TDI CR 163 hp has 3 TCU variants: Temic DQ250 (MQB), Temic DQ250E, Temic DQ250F. Remapping the gearbox is essential after Stage 1 — the factory torque limiter is usually below what the engine can deliver.
Does the factory warranty of the Audi A6 remain valid after Stage 1?
After remapping the Audi A6, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi A6?
Reading and writing via OBD takes 25-30 minutes on the Audi A6. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi A6?
Before Stage 1 the original of the Audi A6 2.0 TDI CR 163 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi A6 2.0 TDI CR 163 hp cost?
The remap price for the Audi A6 2.0 TDI CR 163 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.