Audi A6 1.9 TDI IP 130 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Audi A6 1.9 TDI IP 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A6 1.9 TDI IP 130 hp ECU
Audi A6 (1997 - C5) 1.9 TDI IP 130 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 130 to 160 hp (+30 hp, +23%) and torque from 310 to 365 Nm (+55 Nm). ECU — Bosch EDC15P+. Flashing method: OBD or Bench depending on the unit's protection. The 1997 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Audi is part of the Volkswagen Group (VAG), Europe's largest automotive group. Audi Sport is Audi's performance division, building the RS models. Audi shares platforms with Volkswagen, Porsche, Bentley and Lamborghini within VAG. The Audi diesel range is fully unified with Volkswagen, Skoda and Seat within VAG. On older Audi diesels, Stage 1 is flashed via OBD without any complications. The MQB platform lets a single calibration cover Audi/VW/Skoda/Seat.
APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. On mid-range Audi diesels, Stage 1 delivers a noticeable torque gain. Within the VAG group, ECUs are standardised, so a single file often fits a dozen models across Audi/VW/Skoda/Seat. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe.
Frequently asked questions
How much does the power of the Audi A6 1.9 TDI IP 130 hp increase after Stage 1?
After Stage 1 the power of the Audi A6 1.9 TDI IP 130 hp rises from 130 to 160 hp, a gain of 30 hp (+23%). Torque rises from 310 to 365 Nm (+55 Nm).
How does Stage 1 differ from stock on the Audi A6?
Stage 1 on the Audi A6 1.9 TDI IP 130 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.9 TDI IP 130 hp?
Stage 1 on the Audi A6 1.9 TDI IP 130 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Audi A6 1.9 TDI IP 130 hp?
Stage 2 on the Audi A6 1.9 TDI IP 130 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Audi A6 1.9 TDI IP 130 hp run?
The control unit of the Audi A6 1.9 TDI IP 130 hp is the Bosch EDC15P+. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Audi A6?
Stage 1 on the Audi A6 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Audi A6 1.9 TDI IP 130 hp done?
The full remap cycle for the Audi A6 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Audi A6?
The original Audi A6 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Audi A6 1.9 TDI IP 130 hp?
The cost of Stage 1 for the Audi A6 1.9 TDI IP 130 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.