Audi A5 2.0 TFSI 252 hp — Stage 1 file (+48 hp)
hp
Stage 1 file for Audi A5 2.0 TFSI 252 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A5 2.0 TFSI 252 hp ECU
Audi A5 (2016 - F5) 2.0 TFSI 252 hp — premium petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 252 to 300 hp (+48 hp, +19%) and torque from 370 to 440 Nm (+70 Nm). This engine ships with different ECU variants: Siemens/Continental Simos18.1, Siemens/Continental Simos18.4, Siemens/Continental Simos18.6. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DL382, Temic DL501 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 5 configurations · 5 ECU variants. The 2016 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
quattro is Audi's signature all-wheel-drive system, introduced in 1980. The four rings in the Audi logo are a legacy of the 1932 Auto Union merger of Audi, Horch, DKW and Wanderer. The Audi community is one of the most active in Europe for chip tuning. The Audi community is one of the most open in Europe, with a large library of ready-made Stage files. The MQB and MLB platforms allow ECU commonality with Volkswagen, Porsche and Bentley. TFSI is Audi's signature designation for direct-injection petrol turbo engines.
APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. On Audi, Stage 1 usually fits within the standard turnaround time. Audi S models sit between the standard cars and the RS range. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential.
The S tronic TCU requires calibration at Stage 1+, as the torque limiter usually sits below the engine's potential. Tiptronic is Audi's classic automatic for longitudinally mounted engines. S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range).
Frequently asked questions
What is the Stage 1 effect on the Audi A5 2.0 TFSI 252 hp?
The Stage 1 gain for the Audi A5 2.0 TFSI 252 hp is 48 hp (+19%) over the stock 252 hp, for a total of 300 hp. Torque rises from 370 to 440 Nm (+70 Nm).
What is Stage 1 chip tuning for the Audi A5?
Stage 1 is a software optimization of the factory ECU firmware of the Audi A5 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +48 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Audi A5?
The high-output Audi A5 2.0 TFSI 252 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Audi A5 2.0 TFSI 252 hp?
Stage 2 on the Audi A5 2.0 TFSI 252 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Audi A5 2.0 TFSI 252 hp built with?
The Audi A5 2.0 TFSI 252 hp comes with 3 ECU variants: Siemens/Continental Simos18.1, Siemens/Continental Simos18.4, Siemens/Continental Simos18.6. Calibration is done for the specific unit after the revision is identified.
Can all the gearbox variants (Temic DL382, Temic DL501) on the Audi A5 be calibrated?
The Audi A5 2.0 TFSI 252 hp has 2 TCU variants: Temic DL382, Temic DL501. Remapping the gearbox is essential after Stage 1 — the factory torque limiter is usually below what the engine can deliver.
Does the factory warranty of the Audi A5 remain valid after Stage 1?
After remapping the Audi A5, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi A5?
Reading and writing via OBD takes 25-30 minutes on the Audi A5. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi A5?
Before Stage 1 the original of the Audi A5 2.0 TFSI 252 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi A5 2.0 TFSI 252 hp cost?
The remap price for the Audi A5 2.0 TFSI 252 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.