Audi A5 2.0 TFSI 225 hp — Stage 1 file (+65 hp)
hp
Stage 1 file for Audi A5 2.0 TFSI 225 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A5 2.0 TFSI 225 hp ECU
Audi A5 (2011 - 8F) 2.0 TFSI 225 hp — premium petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 225 to 290 hp (+65 hp, +29%) and torque from 350 to 440 Nm (+90 Nm). This engine ships with different ECU variants: Siemens/Continental Simos12.1, Siemens/Continental Simos12.2, Siemens/Continental Simos18.1, Siemens/Continental Simos18.2, Siemens/Continental Simos18.3, Siemens/Continental Simos18.6. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: ZF ALx51, Temic DL501 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 8 configurations · 8 ECU variants. A petrol engine built in 2011 — a Tricore platform without strong protection; OBD access works.
Audi's signature slogan is “Vorsprung durch Technik” (Progress through Technology). Audi is a premium manufacturer from Ingolstadt (Bavaria), founded in 1909 as Audiwerke August Horch & Cie. Audi's petrol range is badged TFSI, and the diesel range TDI. The MQB and MLB platforms allow ECU commonality with Volkswagen, Porsche and Bentley. TFSI is Audi's signature designation for direct-injection petrol turbo engines. Mid-generation petrol models get a standard OBD flash via the MQB platform.
On Audi, Stage 1 usually fits within the standard turnaround time. Audi S models sit between the standard cars and the RS range. On pre-2017 Audi models, Stage 1 is flashed via OBD without bench. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1.
Tiptronic is Audi's classic automatic for longitudinally mounted engines. S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range). S tronic comes in dry and wet-clutch versions, each with a different torque rating.
Frequently asked questions
How many horsepower does the Audi A5 2.0 TFSI 225 hp reach after a remap?
Stage 1 chip tuning on the Audi A5 2.0 TFSI 225 hp boosts engine output by 65 hp: from 225 to 290 hp. Torque rises from 350 to 440 Nm (+90 Nm).
What changes in the Audi A5 ECU after Stage 1?
Stage 1 chip tuning of the Audi A5 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +65 hp with no hardware changes.
Is Stage 1 safe on the high-output Audi A5 2.0 TFSI 225 hp?
Stage 1 on the powerful Audi A5 2.0 TFSI 225 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How much does Stage 2 add on the Audi A5?
Stage 2 for the Audi A5 2.0 TFSI 225 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the Audi A5 2.0 TFSI 225 hp?
The Audi A5 2.0 TFSI 225 hp was fitted with different ECUs depending on the year and trim: Siemens/Continental Simos12.1, Siemens/Continental Simos12.2, Siemens/Continental Simos18.1, Siemens/Continental Simos18.2, Siemens/Continental Simos18.3, Siemens/Continental Simos18.6. The write method (OBD, Bench, Boot) is determined when the unit is read.
How many TCU units does the Audi A5 2.0 TFSI 225 hp have?
The Audi A5 2.0 TFSI 225 hp comes with 2 different automatic-transmission TCU units: ZF ALx51, Temic DL501. Each is calibrated with a separate file — torque limit, shift maps and launch control rpm for Stage 1.
What happens to the Audi A5 warranty after chip tuning?
The factory warranty of the Audi A5 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Audi A5 take?
On the Audi A5 2.0 TFSI 225 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Audi A5?
Yes, the original ECU firmware of the Audi A5 2.0 TFSI 225 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Audi A5?
Stage 1 for the Audi A5 2.0 TFSI 225 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.