Audi A5 2.0 TDI CR EU6 190 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Audi A5 2.0 TDI CR EU6 190 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A5 2.0 TDI CR EU6 190 hp ECU
Audi A5 (2011 - 8F) 2.0 TDI CR EU6 190 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 190 to 220 hp (+30 hp, +16%) and torque from 400 to 450 Nm (+50 Nm). This engine ships with different ECU variants: Bosch EDC17C64, Bosch EDC17C74, Bosch EDC17CP74. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DL382, Temic DQ250 (MQB), Bosch DQ38x, Bosch DQ500 (MQB) — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 14 configurations · 7 ECU variants. The 2011 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Audi shares platforms with Volkswagen, Porsche, Bentley and Lamborghini within VAG. Audi's signature slogan is “Vorsprung durch Technik” (Progress through Technology). Audi is a premium manufacturer from Ingolstadt (Bavaria), founded in 1909 as Audiwerke August Horch & Cie. The MQB platform lets a single calibration cover Audi/VW/Skoda/Seat. DPF/SCR with AdBlue is standard on all Euro-6 Audi diesels. TDI is Audi's signature designation for direct-injection turbo diesels, in production since 1989.
APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. On Audi, Stage 1 usually fits within the standard turnaround time. On pre-2017 Audi models, Stage 1 is flashed via OBD without bench. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe.
S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range). S tronic comes in dry and wet-clutch versions, each with a different torque rating. The S tronic TCU requires calibration at Stage 1+, as the torque limiter usually sits below the engine's potential.
Frequently asked questions
What power gain do you get after chip tuning the Audi A5 2.0 TDI CR EU6 190 hp?
After Stage 1 the power of the Audi A5 2.0 TDI CR EU6 190 hp rises from 190 to 220 hp, a gain of 30 hp (+16%). Torque rises from 400 to 450 Nm (+50 Nm).
How does Stage 1 differ from stock on the Audi A5?
Stage 1 is a software optimization of the factory ECU firmware of the Audi A5 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Audi A5 2.0 TDI CR EU6 190 hp?
A remap of the Audi A5 2.0 TDI CR EU6 190 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Audi A5 2.0 TDI CR EU6 190 hp?
Stage 2 on the Audi A5 2.0 TDI CR EU6 190 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Audi A5 2.0 TDI CR EU6 190 hp built with?
The Audi A5 2.0 TDI CR EU6 190 hp comes with 3 ECU variants: Bosch EDC17C64, Bosch EDC17C74, Bosch EDC17CP74. Calibration is done for the specific unit after the revision is identified.
Can all the gearbox variants (Temic DL382, Temic DQ250 (MQB), Bosch DQ38x, Bosch DQ500 (MQB)) on the Audi A5 be calibrated?
The Audi A5 2.0 TDI CR EU6 190 hp has 4 TCU variants: Temic DL382, Temic DQ250 (MQB), Bosch DQ38x, Bosch DQ500 (MQB). Remapping the gearbox is essential after Stage 1 — the factory torque limiter is usually below what the engine can deliver.
Does the factory warranty of the Audi A5 remain valid after Stage 1?
After remapping the Audi A5, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi A5?
Reading and writing via OBD takes 25-30 minutes on the Audi A5. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi A5?
Before Stage 1 the original of the Audi A5 2.0 TDI CR EU6 190 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi A5 2.0 TDI CR EU6 190 hp cost?
The remap price for the Audi A5 2.0 TDI CR EU6 190 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.